Muskie Discussion Forums

Forums | Calendars | Albums | Quotes | Language | Blogs Search | Statistics | User Listing
You are logged in as a guest. ( logon | register )
Moderators: Slamr

View previous thread :: View next thread
Jump to page : 1
Now viewing page 1 [30 messages per page]

Muskie Fishing -> General Discussion -> Hook Sharpener
 
Message Subject: Hook Sharpener

Posted 12/5/2001 6:17 AM (#1866)
Subject: Hook Sharpener


Looking for suggestions on the best hook sharperner around. Thanks

Posted 12/5/2001 7:30 AM (#16244)
Subject: Hook Sharpener


The one I like is Russ Smith's. Wooden handle and double rods that sharpen up a hook razor sharp.
Rob

www.imdreamingofagreenchristmasjustliketheonesinsantafe.com


Posted 12/5/2001 8:32 AM (#16243)
Subject: Hook Sharpener


Any of the sharpeners that use the two chain saw files work great.
Smitty's amd the Sure Sharp are a couple that I can think of.

Posted 12/5/2001 8:36 AM (#16242)
Subject: Hook Sharpener


Russ Smith's sharpener works great. Don't allow this style sharpener out in the rain as they are suseptible to rusting which reduces their effectiveness.

Posted 12/5/2001 8:57 AM (#16241)
Subject: Hook Sharpener


I agree Smitty's is the one to buy. I've had them rust up, and a couple have gotten broke in my boat. What I do now is save the wood handles and put my own files back in them. The best files I've found are the smallest Nicholson chain saw files available at Fleet Farm. I put a small hose clamp around them and braze only the opposite handle ends together then epoxy them into the handles. These files are a higher quality then what come on marketed hook sharpener. If you don't have a broken or bad sharpener a wood file handle would work as well.

Posted 12/5/2001 9:51 AM (#16240)
Subject: Hook Sharpener


yep, smity all the way! Never had a better one or an easier to use one

Posted 12/5/2001 9:58 AM (#16239)
Subject: Hook Sharpener


Another vote for the double round file style. I had one so sharp from this file that I accidentally raked my finger lightly over one, not even going against the point of the hooks and opened it up like a paper cut.

Don't get the mister twister battery powered one. The motor is not strong enough, nor is the hole for the hook and if you can get one sharp it takes forever. Mine broke already.

Posted 12/5/2001 11:31 AM (#16247)
Subject: Hook Sharpener


I use a small Dremel Tool in the basement to get them ready for the final sharpening with the flat/mill-bastard/little yellow handled!I don`t like those 2 round files together,there is areas of the hook that can`t be reached!I guess I am old-fashioned,but the little yellow handled file works the best for me! Jeff

Posted 12/5/2001 3:00 PM (#16248)
Subject: Hook Sharpener


I too vote for the yellow handled flat file. I have the double chain saw file and if need be, I'll start with that but I seem to have much better luck getting a good point with the flat ones.


Posted 12/5/2001 6:13 PM (#16245)
Subject: Hook Sharpener


I am with Theedz on this one.. the simple lure jenson yellow fine flat file is just perfect.. The others seam to take too much off. I just make three sweeps and its razer sharp.

Posted 12/5/2001 6:42 PM (#16246)
Subject: Hook Sharpener


Thanks fellas, I didn't realize it, but I already have the Smitty and have been using it (got it a sports show from a Musky guide). Of course, everyone has the yellow handled one. I guess simple is the best as long as you use it. Thanks for the input. Tom

Posted 12/5/2001 8:53 PM (#16249)
Subject: Hook Sharpener


One more thing.

I also use a small Nicholson flat file to dress up the hook before I hit it with the double round. Kind of hard to explain, but here goes. If you look close at a hook after using a double round you will notice the hook point (on larger hooks particularly) is not a point. What I do is run the flat file in the same direction as you would the double round, then hit it with the double round. It should only take a few strokes with each. If the hook is filed to much it will be necessary to put a new hook on to acheive a sharp point. Hooks are cheap and it would be a shame to miss a fish due to a possible dull hook. Equipment is one odd I don't beleive in letting the fish have.
Jump to page : 1
Now viewing page 1 [30 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete all cookies set by this site)