Muskie Discussion Forums
| ||
Random quote: "You must stop antagonizing the mentally unstable....it makes them WORSE, not better." -- Mike Winther - (Added by: Slamr) |
Moderators: Slamr | View previous thread :: View next thread |
Jump to page : 1 Now viewing page 1 [30 messages per page] More Muskie Fishing -> Basement Baits and Custom Lure Painting -> Repairing rubber/plastic tails |
Message Subject: Repairing rubber/plastic tails | |||
muskyslayer96 |
| ||
Posts: 615 Location: Madison, WI | Hey fellas, I ask this a lot and get a number of different opinions, what is the best way to repair a tearing tail on a bulldawg lure? Is the glue they sell any good? I've tried melting them but wasn't impressed with the durability? Thanks in advance, hope everyone season is going well MS | ||
Ebenezer |
| ||
Posts: 210 | For tails, Mend It works quite well. Melting also works, I get best melting results when I let the rubber catch fire before joining the sections. | ||
gordonmann69 |
| ||
Posts: 149 | I like Mend it | ||
The Toad |
| ||
Posts: 137 | Out on the water I use a windproof lighter or mini torch and it usually holds until I get back to work on it more on shore. Once at home, I melt mine together with a hot butter knife, and afterwards I spread both sides with the butter knife to make sure it holds. If it is beyond repair and the tear is in a thin part of the tail or messes up the action, get a replacement tail and switch them out, that is easy to do. I have a metal ruler I clamp to the wall in my garage and then blow torch it until it's hot, then slide both the bulldawg and replacement tail along it and together. Good as new tail. | ||
fishfirst92 |
| ||
Posts: 661 Location: Sussex, NJ | +2 on Mend it. It works well | ||
Zib |
| ||
Posts: 1405 Location: Detroit River | I've used Mend-it & I've melted with a lighter & I prefer the Mend-it. I've also heard that the PVC cement that's used for PVC pipes works good as well but have never tried it. | ||
eric001 |
| ||
Posts: 222 Location: c.wis | <p>heat a butter knife(or somthing similar) with torch, apply both pieces of plastisol to ether side of hot metal and then slide the knife out- pressing pieces together. works better then mend it- or any other option. this method works well for anypart of the bait including deep cuts the head and body of the lure. also you can use this method to mod. or add fins ect. to the lure. </p><p>opps this has be covered already</p><p>e</p> Edited by eric001 8/5/2012 4:20 PM | ||
jasonvkop |
| ||
Posts: 614 Location: Michigan | eric001 - 8/5/2012 5:18 PM heat a butter knife(or somthing similar) with torch, apply both pieces of plastisol to ether side of hot metal and then slide the knife out- pressing pieces together. works better then mend it- or any other option. this method works well for anypart of the bait including deep cuts the head and body of the lure. also you can use this method to mod. or add fins ect. to the lure. +1 for this! I've used mend-it and all the other kinds of liquids or glues and they work decently well some of the time, but then don't work at all at other times. Melting is the best way IMO and heating up a knife is the best way of melting in most situations. | ||
dietmar |
| ||
Posts: 38 Location: Germany | Hello, the best method for repairing soft rubber lures like bull dawgs, grubs, shads, frogs and so on is using a SMD hot air solder station or hot air rework station at home. http://www.ebay.com/sch/i.html?_nkw=hot+air+solder+station&_sacat=0... This is the perfect way. You can regulate the temperature and the air volume. So you can use the minimum of heat. The plastik don't get brown or black. To use a nozzle with 1 mm to 2 mm is the right size. You open the cut in the plastik one to three millimeter. Then you blow the hot air down to the ground of the cut. So both walls of the cut get liquid on the surface. Then press the cut slightly together. You can use this for all plastik lures. I think the first buy is a bull dawg. The second buy is a hot air solder station for repairing it. I use an expensive station from Loner but some friends of mine use a cheap one from ebay and this work too. The best choice is a station where the air pump is in the station. A fan in the handle is not so good. With a station for maybe about 60 to 80 Dollar you can save the money for hundreds of soft baits. You can not only repair soft baits, you can create new colour combinations. Cut two shads with different colours twice, mix the colours and weld them together. The same with grubs.......... Bye, Dietmar Edited by dietmar 8/12/2012 6:08 AM | ||
krazyk |
| ||
PVC cement rules ! It takes alittle longer to set up but once it is dry the bait is better than new. I rebuilt a bull dawg 4 times last fall including the body and tail and its as tough as nails.. a little more glossy but still catching fish... I've caught a dozen fish on the thing and I'm waiting for it to explode !!! Of course its got a half dozen replacements just waiting for the day when surgery is no longer an option. | |||
Jump to page : 1 Now viewing page 1 [30 messages per page] |
Search this forum Printer friendly version E-mail a link to this thread |
Copyright © 2025 OutdoorsFIRST Media |