Muskie Discussion Forums
| ||
Moderators: Slamr | View previous thread :: View next thread |
Jump to page : 1 Now viewing page 1 [30 messages per page] Muskie Fishing -> Lures,Tackle, and Equipment -> Trolling Rods |
Message Subject: Trolling Rods | |||
TMuskyFisher |
| ||
Posts: 86 Location: Illinois | What are some fairly cheap trolling rods? What length should I use for trolling with planer boards? | ||
ToddM |
| ||
Posts: 20180 Location: oswego, il | Cheapest are the berkely big game rod you can buy or order from walmart. 22 bucks. Has an extra long butt end for fighting fish. | ||
TTS |
| ||
Posts: 88 Location: Wisconsin | Shimano TDR 8' HVY. $35. Tom | ||
MMO |
| ||
Posts: 6 | A little more expensive but I started using an Okuma Battle Cat rod this year in 8' heavy action and I really like it. | ||
supertrollr |
| ||
im with mmo.it's my first okuma product,it quickly became my no1 trolling rod. it's a 2 piece but first piece is located at the handle portion,it's really tight so there is no problem.it's all white so it look really nice,and all the guides are made out of alu so it's wire ready if needed | |||
Old Guy |
| ||
Posts: 84 | I'd like to know how the 8 foot Battle Cats handle the really big ,hard pulling baits...is the action too soft? | ||
anderj85 |
| ||
Posts: 273 Location: US | I use berkley big game as well as shakespeare tidewater. Both cheap and work fairly well. These are all I've ever used though so no basis for comparison. | ||
MMO |
| ||
Posts: 6 | I've been using it with a 12" Headlocks, Mattlocks and a tx44 board with no issues. | ||
TMuskyFisher |
| ||
Posts: 86 Location: Illinois | Is there a certain length i should buy, or is it personal preference? | ||
ToddM |
| ||
Posts: 20180 Location: oswego, il | The longer the rod, the farther back the person fighting the fish will need to be from the person netting the fish. I used to use 9ft rods, now use 7ft rods. The shorter rods work better with a bimini top as well. | ||
TMuskyFisher |
| ||
Posts: 86 Location: Illinois | Thank you! | ||
TMuskyFisher |
| ||
Posts: 86 Location: Illinois | What action do you use? | ||
supertrollr |
| ||
Old Guy - 7/25/2018 12:28 PM it handle perchbait,to plow and tx44 so it can handle everything. one important point ,it fit perfectly into the salty. btw stay away from newer ugly stick tiger. their new guides are really thin and cheap but if you can find the one with near 1/4 thick guides go for it. it's the casting model with no trigger like the battle cat .it's an ugly rod with a brownish color it's a bit faster and stiffer action than the battle and it's one piece. but it's another #*^@ solid one rod that can literally pull a truck. personally i don't like 2 pieces guides they will fail at one time or another that's why one piece alu is a must. I'd like to know how the 8 foot Battle Cats handle the really big ,hard pulling baits...is the action too soft? that's how your guides should like at your tiger https://internal.bdoutdoors.com/2010/09/838762_a6ebbb7eaf22e6848f774... | |||
supertrollr |
| ||
TMuskyFisher - 7/25/2018 5:59 PM This What action do you use? https://www.amazon.com/219094-Okuma-Battle-Casting-BC-C-802H/dp/B00F... | |||
Old Guy |
| ||
Posts: 84 | Supertrollr There are Ugly Stik Tigers which were labelled on the rods with model number BWC2201 called a MED with a very flexible tip which quickly ran into the very heavy bottom half of the rod....and the model BWC2202 labelled MED HVY with an extremely firm action, very little tip flexibility,it is a beast, not at all what I would call med-hvy, extra heavy would be a better description. Could you please tell us which one you use that you posted about above? Thanks for your posts. | ||
supertrollr |
| ||
bwc2202 7 f, med hvy, it will bent with a deep diver cranks and also with shallow lure,and will get enough back bones to hook em good | |||
nar160 |
| ||
Posts: 408 Location: MN | A rod I've been looking at is the Rippin' Lips Super Cat. They run $40-50, come in 1 or 2 piece, stainless guides, and the 8' H model looks like it might have enough power to use with suckers. Most of the cheaper catfish rods are a bit too flimsy to use with quick strikes. Anyone try one of these? | ||
supertrollr |
| ||
not me but from what i have read, that rod is not that good,for big fish, it's more suited for channel cat, a rod that could handle big blue and flathead is more what you want for musky. if you want to pay more for something as tuff as uglystick and battle cat you can also try these. http://tomcatrods.com/product/heavy-tomcat-custom-catfish-rod-custo... a friend have them and i have been really happy about the action | |||
TheShow |
| ||
Posts: 347 Location: Vilas County, WI | Good info here - lots of options. I went with Shimano Sojourn 8' Heavy. 50 bucks each. I chose these because I don't troll a lot... so they're adequate. Can be used with boards, headlocks to 22 Shorts, down rods, all no problem. Plus if I ever break one of my good rods, I have these trolling rigs on board that can quickly become a backup casting rod if necessary. Lastly, I use them for my sucker rods in the fall. Multi-purpose so I can justify having 3 of them at that price point. | ||
Jump to page : 1 Now viewing page 1 [30 messages per page] |
Search this forum Printer friendly version E-mail a link to this thread |
Copyright © 2024 OutdoorsFIRST Media |