MuskieFIRST | broke rear light pole conection » Muskie Boats and Motors

Muskie Discussion Forums

You are logged in as a guest. ( logon | register )

Moderators: Slamr	View previous thread :: View next thread
Jump to page : 1 Now viewing page 1 [30 messages per page] Muskie Fishing -> Muskie Boats and Motors -> broke rear light pole conection

Message Subject: broke rear light pole conection

Briguy48

Posted 10/1/2014 8:14 PM (#732880)
Subject: broke rear light pole conection

Posts: 188

Location: Downers Grove

2005 tuffy 1760gc. The male end (inside the fiberglass broke off) its loose and you can't get to it. Took of the housing where the throttle goes through the side walls and still couldn't get to it. Any ideas? Has this ever happened to you?

sworrall

Posted 10/1/2014 8:38 PM (#732886 - in reply to #732880)
Subject: Re: broke rear light pole conection

Posts: 32886

Location: Rhinelander, Wisconsin

The running light socket? That comes off with a couple screws.

ESOX Maniac

Posted 10/2/2014 10:26 AM (#732936 - in reply to #732886)
Subject: Re: broke rear light pole conection

Posts: 2753

Location: Mauston, Wisconsin

If you have the broken socket out and the other half is in the boat hull area where it can't be reached with a pliers, etc.. Try a coat hanger with a J hook bent in one end, going through the socket hole.

Good luck!
Al

Edited by ESOX Maniac 10/2/2014 10:28 AM

Jump to page : 1
Now viewing page 1 [30 messages per page]

Search this forum
Printer friendly version
E-mail a link to this thread