|
|
Posts: 325
Location: Otsego, MN | Ok guys I did a quick search of some older posts but wondering if there are any basics/general advice you wish to share...
I am going to try painting a few of my own baits (Jakes) in the next few weeks and was curious if their were any recommendations or things to consider and be aware of before I give it my first try.
Thanks! |
|
| |
|
Posts: 1202
Location: Money, PA | What are you wondering or wanting to know? There are alot of steps and processes to painting baits. Loaded question without more specifics on your part IMO.... |
|
| |
|
Posts: 325
Location: Otsego, MN | Maybe I can add some more context and specifics....
Primers - Are they necessary for a plastic bait thats already off white? Are they required for wood baits?
Sealers - What would be the impact of not sealing a wooden bait?
Assuming I have gotten through the painting with good success... What is the best epoxy or top coat you guys recommend? |
|
| |
|
Posts: 1202
Location: Money, PA | Cool!
1 - My baits are solid resin/plastic...YES, I always prime the bait just so I know I have good adhesion. Could you paint right on the plastic without priming? Probably. I just play it safe and start with a nice clean white canvas to paint on.
2 - Lots of effects....water logging easier, seepage of oils from the wood, lacking smoothness...Some guys seal their wood baits with epoxy (thats what I would use)
3 - several epoxies out there - Crystal Sheen, Envirotex, EX-74, Diamond 2 - All work good and have different thicknesses and properties...you just have to find one that fits your liking....I started out with Envirotex and have recently moved to EX-74
Good Luck! |
|
| |
