|
|
Posts: 153
| I was curious what people are using to paint their baits and clear coat them, I dont have any air brushes so im leaning toward shaker cans. |
|
| |
|
Posts: 1530
| depends on types wood/plastic/foamies/metal.... |
|
| |
|
Posts: 153
| im repainting some rapla gliden raps and it appears their plastic and im also repainting some wood suicks |
|
| |
|
Posts: 1530
| use a white base after scuffing. mask and spray. white base for florescents. use a acrylic clear. mist coat first clear. dry and spray finish coat. use painters tape on lips |
|
| |
|
Posts: 283
| The Glidin' Raps are African Abachi wood if that matters. I have repainted one that was pretty beat up- I can't remember if I used spray can or createx but I know I used e-tex for the clear. It turned out ok, I didn't do enough prep but it's good enough for my personal use.
I love the golden shiner pattern (foil) and found that the hook rash eventually leads to the foil peeling so now when I get a new one I will throw a thin coat or two of clear on it to help preserve it.
Edited by Tigerhunter 4/27/2014 9:23 PM
|
|
| |
|
Posts: 153
| so use acrlics dose any one use laqures |
|
| |
|
Posts: 791
Location: WI | I you all auto paints and Lacquers. Solvent based. And envirotex clear. |
|
| |
