MuskieFIRST | Hummingbird 1197 Not Reading Maps when 2 Map Chips In Unit » Muskie Boats and Motors

Muskie Discussion Forums

You are logged in as a guest. ( logon | register )

Moderators: Slamr	View previous thread :: View next thread
Jump to page : 1 Now viewing page 1 [30 messages per page] Muskie Fishing -> Muskie Boats and Motors -> Hummingbird 1197 Not Reading Maps when 2 Map Chips In Unit

Message Subject: Hummingbird 1197 Not Reading Maps when 2 Map Chips In Unit

MJH

Posted 4/14/2014 10:37 PM (#706824)
Subject: Hummingbird 1197 Not Reading Maps when 2 Map Chips In Unit

Posts: 74

Location: Minnesota

Pulled the boat out for a wash this weekend and fired up the 1197. Noticed the GPS mapping wasn't reading either card and returned essentially a blank screen when I had 2 map chips in the unit. I've had both map chips in the unit for several years and never encountered this issue before. When I only had one map chip in the unit it worked fine for both cards. Does anyone have any ideas what's going on. I appreciate any advice you can provide. Thank you.

kjgmh

Posted 4/15/2014 8:00 AM (#706856 - in reply to #706824)
Subject: Re: Hummingbird 1197 Not Reading Maps when 2 Map Chips In Unit

Posts: 1096

Location: Hayward, WI

First step is to make sure that you have the most recent updates installed. If still not working then call Humminbird.

John23

Posted 4/15/2014 10:18 PM (#707056 - in reply to #706824)
Subject: Re: Hummingbird 1197 Not Reading Maps when 2 Map Chips In Unit

Posts: 46

I run mine with both chips in the unit, but one "clicked out" of the slot, so that only the one I want the unit to read is all the way in.

Jump to page : 1
Now viewing page 1 [30 messages per page]

Search this forum
Printer friendly version
E-mail a link to this thread