|
|
Posts: 1316
Location: Lebanon,Mo | Was going to be a spare for the salt boat,never put on. Still have the box as well.
13 1/2 x 17 Pitch, 15 Spline
Genuine Yamaha part# 68V-45941-00
$115.00 shipped "PENDING"
Edited by missourimuskyhunter 7/12/2013 1:45 PM
Attachments
----------------
 prop1.jpg (117KB - 115 downloads)
prop2.jpg (130KB - 106 downloads)
prop3.jpg (79KB - 108 downloads)
|
|
| |
|
Posts: 3514
Location: Elk River, Minnesota | Hiya,
Just so somebody doesn't inadvertantly purchase...MMH's prop will fit Yamaha mid range motors for 75 - 130hp two stroke, and 75 - 115 four stroke.
K series propeller, which is for a 4-1/2" gearcase. Above the midrange (150hp and above) will be an M series propeller with a larger hub.
Steve
Edited by VMS 7/10/2013 9:57 PM
|
|
| |
|
Posts: 1316
Location: Lebanon,Mo | Thanks Steve.....but this prop fits my '01 200 Saltwater Series as well. |
|
| |
|
Posts: 360
Location: Algonac, MI | V6 Yamaha outboards (150-250) have a 4 3/4" diameter gear case.
The prop above is for mid-range Yamaha outboards, with a 4 1/2" diameter gear case. Yes, this prop will slide on a 200 and 'get you home', but it has the incorrect diameter hub for proper use.
It will spin RPMs like no tomorrow, with only a 13 1/2 dia x 17, on a 200 V6.
Yamaha 68V-45941-00-00 13 1/2 x 17 Deep V Series Prop
Rotation Right
Fits 60~130, T50, T60, F70~F115
Specially engineered to reduce ventilation and enhance bow lift, Yamaha’s “Deep V”aluminum 3 bladed propellers offer excellent holding power in turns, with enhanced“grip” for improved control. In addition, they feature better overall performance andgreater cruising efficiency in a planed trim position than conventional 3 bladedaluminum propellers. “Deep V” props are especially effective on mid-sized deepandmod-V aluminum boats, particularly in applications with the potential for aeratedwater beneath the boat. Available in 17” and 19” pitches, for T50 ~ F115 four stroke and 60~ 130hp two stroke Yamaha outboards.
Edited by Contender 7/11/2013 8:30 AM
|
|
| |
|
Posts: 1316
Location: Lebanon,Mo | Well i forgot to mention this was a spare for my 21' Offshore boat,coming in at 4100lbs full of fuel,gear,etc. I have the same prop in stainless and revs out around 5800rpms,so this prop is right on for my application,and recommended by Yamaha. Glad to see it covers a wide range of motor sizes as well.
*** My Bad !! Just checked the lower unit and it is the bigger hub. My stainless on there now is the correct hub size for the motor.***
Edited by missourimuskyhunter 7/11/2013 9:49 AM
|
|
| |
