|
|
| Hi, I have a 621 Ranger with the "bubble" style wind screens that come standard from the factory. I am looking for something 2-3" higher to eliminate wind and rain in your face. Ranger says the 13" is a coast guard reg and makes none higher. But, I see rigs with higher windshields. If any one has a source for these higher windshields, I would appreciate positing it. Thanks, |
|
| |
|
Posts: 925
| My buddy got higher ones from Frankie's Marine. I thought they were made by Ranger but maybe not. Anyways they work great and I would recommend them over the ones that come standard. |
|
| |
|
Posts: 5874
| Who from Ranger said that? The higher windscreens are an option. I know lots of guys that got them on their new Ranger 620/621's.
Go to a good Ranger Dealer, and order them.
Edited by Shep 5/14/2013 8:21 AM
|
|
| |
|
Posts: 40
Location: Cave Run, KY | Did the same here! I called ranger direct and they sent them to me. Just make sure you check your cover first to see if it has enough slack to compensate for the added height. Mine was tight and presses tight against the plastic shield. I'm considering retrofitting with wing nuts permit easy removal of the sheild like I see some do on the Lunds. |
|
| |
|
Posts: 3
| Thanks guys for the feedback. That was the word I got direct from two differnet people direct at Ranger service parts group. I even got some "vertical" shields in last fall and they had a different angle to them but were no higher (13.5") and actuall would not contour onto my console and drill holes were off 2". So, I'm not sure what is up. I have a 2004 model year, so maybe the year is the issue. If any one has a ranger part number you can provide that would be great. Not the best luck with details from the Ranger folks. I will try Frankies for their input too. Thanks |
|
| |
