MuskieFIRST | Homemade Bumpboard » Lures,Tackle, and Equipment

Muskie Discussion Forums

You are logged in as a guest. ( logon | register )

Moderators: Slamr	View previous thread :: View next thread
Jump to page : 1 Now viewing page 1 [30 messages per page] Muskie Fishing -> Lures,Tackle, and Equipment -> Homemade Bumpboard

Message Subject: Homemade Bumpboard

Riverrat351

Posted 2/19/2013 9:13 PM (#618772)
Subject: Homemade Bumpboard

Posts: 279

Location: Central Wisconsin

Hi,
I have been considering making my own bumpboard and I've been trying to search for the homemade bumpboard thread that was posted sometime last year. Can anyone help me out? It had pics from several people that have made their own, there were some good ideas.
Thanks

Vince Weirick

Posted 2/21/2013 12:17 AM (#619231 - in reply to #618772)
Subject: Re: Homemade Bumpboard

Posts: 1060

Location: Palm Coast, FL

http://muskie.outdoorsfirst.com/board/forums/thread-view.asp?tid=82...

http://muskie.outdoorsfirst.com/board/forums/thread-view.asp?tid=73... board&highlightmode=1#M556325

Guest

Posted 2/21/2013 7:42 AM (#619259 - in reply to #618772)
Subject: RE: Homemade Bumpboard

Cool threads, I've been fighting buying one vs. making one. There are some good ideas there

Riverrat351

Posted 2/21/2013 11:52 AM (#619386 - in reply to #619231)
Subject: Re: Homemade Bumpboard

Posts: 279

Location: Central Wisconsin

Excellent! Thanks Vince!!

hunter991

Posted 2/21/2013 1:38 PM (#619456 - in reply to #618772)
Subject: Re: Homemade Bumpboard

Posts: 139

This is actually a fun project. I made mine out of vinyl trim boards from Menards. Its about 1/4 thick, white with a wood grain texture. I cut 2 pieces 30" long, put 2 hinges in the middle and took another piece to make the bumper on top. I used a stong epoxy to glue that on. then just went to walmart and got some measuring tape (made out of vinyl) the stuff that comes in a small roll used for sewing. Glued that down. For about $10 i have mine and its held up to 3 years so far. I just can't see paying close to $100 for someone to make me one.

Guest

Posted 2/21/2013 5:09 PM (#619551 - in reply to #618772)
Subject: RE: Homemade Bumpboard

you can make one for $20 or so. def. the way to go!

do a good search for plastic hinges. they work awesome!

little one

Posted 2/21/2013 8:26 PM (#619598 - in reply to #618772)
Subject: RE: Homemade Bumpboard

Posts: 501

Location: S.Wisconsin

Made mine out of cedar full length with no hinge. Coated the whole thing in envirotex and she is plenty slick when wet. Used a starrett 36" blade to set the tape to so I know its accurate. If you want I can post a couple pics.

Zoom - | Zoom 100% | Zoom + | Expand / Contract | Open New window

Click to expand / contract the width of this image

(bump.jpg)

Attachments
----------------

bump.jpg (61KB - 224 downloads)

Masqui-ninja

Posted 2/21/2013 8:33 PM (#619601 - in reply to #619598)
Subject: RE: Homemade Bumpboard

Posts: 1247

Location: Walker, MN

little one - 2/21/2013 8:26 PM

Made mine out of cedar full length with no hinge. Coated the whole thing in envirotex and she is plenty slick when wet. Used a starrett 36" blade to set the tape to so I know its accurate. If you want I can post a couple pics.

Yes, pics please. This will be a fun project, way too much time until June.

little one

Posted 2/21/2013 8:38 PM (#619603 - in reply to #619601)
Subject: RE: Homemade Bumpboard

Posts: 501

Location: S.Wisconsin

I just ran out to the boat and added that pic. Only goes to 56".....I figured I fish WI and didnt want to get greedy...LOL. As you can see there are also pics of fish under the epoxy. Just a little personal touch

jaycbs74

Posted 2/21/2013 8:57 PM (#619608 - in reply to #618772)
Subject: Re: Homemade Bumpboard

Posts: 136

Location: Chicago

I wanted an heirloomed older look. So I used some 1/2" x 10" maple routed the edges distressed it with worm holes and what not. Then stained and glazed it with weathered teak stain and couldn't be happier.

Jump to page : 1
Now viewing page 1 [30 messages per page]

Search this forum
Printer friendly version
E-mail a link to this thread