Posts: 3480
Location: Elk River, Minnesota | Hiya,
A buddy of mine has a Revo Toro 61 Winch but he hates the gearing. He is looking to change the gearing out for a set of High speed gears. My gut says it would only be changing out the main gear and a pinion gear, but am unsure and don't have a schematic in front of me currently.
I have not taken a toro apart before...how tough of a change-out is this and what kind of cost would I be looking at for the gears?
Thanks for any help you can provide...
Steve |
Location: Latitude 41.3016 Longitude 88.6160 | VMS - 1/30/2013 8:02 PM
Hiya,
A buddy of mine has a Revo Toro 61 Winch but he hates the gearing. He is looking to change the gearing out for a set of High speed gears. My gut says it would only be changing out the main gear and a pinion gear, but am unsure and don't have a schematic in front of me currently.
I have not taken a toro apart before...how tough of a change-out is this and what kind of cost would I be looking at for the gears?
Thanks for any help you can provide...
Steve
You will need the reel so you can give the # on the reel foot to ABU and they will tell you what you will need , should be the Pinion and Main Gear and maybe the pinion holder, should cost about $50.00
Toro reels are very simple to take apart, just use a schmatic. |