MuskieFIRST | Rubber coating a net » Lures,Tackle, and Equipment

Muskie Discussion Forums

You are logged in as a guest. ( logon | register )

Moderators: Slamr	View previous thread :: View next thread
Jump to page : 1 Now viewing page 1 [30 messages per page] Muskie Fishing -> Lures,Tackle, and Equipment -> Rubber coating a net

Message Subject: Rubber coating a net

bstein

Posted 3/23/2012 3:31 PM (#548087)
Subject: Rubber coating a net

Posts: 93

Location: WI

I have a smaller Beckman net that I use for walleye and northern and such and the net is not coated at all and hooks are always getting tangled in it. It's a pain in the butt but is a very nice deep net. Was wondering if anyone has tried to spray a net down with a rubber coating of some type or undercoating in a can from the automotive store. Not sure if that would work or if the net would get to stiff and not move. I don't really want to stick $20 or $30 into a replacement rubber coated net either.

Thanks for any ideas

archerynut36

Posted 3/23/2012 8:26 PM (#548141 - in reply to #548087)
Subject: Re: Rubber coating a net

Posts: 1887

Location: syracuse indiana

replace the net. do not i repeat do not coat that yourself. it will melt in your boat and mess anything it comes in contact with.. i have seen what it will do, so i would not do it if i were you...bill

Jump to page : 1
Now viewing page 1 [30 messages per page]

Search this forum
Printer friendly version
E-mail a link to this thread