MuskieFIRST | GMT-40 depth and temperature probe » General Discussion

Muskie Discussion Forums

You are logged in as a guest. ( logon | register )

Moderators: Slamr	View previous thread :: View next thread
Jump to page : 1 Now viewing page 1 [30 messages per page] Muskie Fishing -> General Discussion -> GMT-40 depth and temperature probe

Message Subject: GMT-40 depth and temperature probe

Posted 10/16/2002 5:28 AM (#3189)
Subject: GMT-40 depth and temperature probe

Im looking for a GMT-40 depth and temperature probe.

Anyone ever use on or know where I can get one?

Posted 10/16/2002 10:40 AM (#47733)
Subject: GMT-40 depth and temperature probe

Hi Bill- I found this posted on the Web-> "The GMT 40+ is a depth and temperature gauge. You lower it down slowly and once it sits in the same place for 10 seconds it finishes taking it reading. This could be on bottom and if used with a dipsy (to find the depth of the dipsy). Bring it back in and it will read out the temperature at 5 foot intervals. THis is great for finding the right temperature and depth to fish. Do not lower the GMT40+ below 100 feet it will damage the unit. The unit runs $60 and can be bought at many places including cabelas, captain garys's, etc.
Mark Lassig
Naperville, IL USA - Thursday, August 22, 2002 at 21:12:13 (EDT)"

Al Warner

www.spongebobismyspiritualguide.com

Posted 10/16/2002 11:56 AM (#47734)
Subject: GMT-40 depth and temperature probe

Thanks,
I seen the one in Cabelas for $59.99.
Was not sure if this is the same one that I read about but I'll give it a try.

Jump to page : 1
Now viewing page 1 [30 messages per page]

Search this forum
Printer friendly version
E-mail a link to this thread