MuskieFIRST | hey pikemaster » Lures,Tackle, and Equipment

Muskie Discussion Forums

You are logged in as a guest. ( logon | register )

Moderators: Slamr	View previous thread :: View next thread
Jump to page : 1 Now viewing page 1 [30 messages per page] Muskie Fishing -> Lures,Tackle, and Equipment -> hey pikemaster

Message Subject: hey pikemaster

Lungemadness

Posted 7/26/2011 4:09 AM (#508946)
Subject: hey pikemaster

Posts: 152

Can the needle bearing in a 6600 C4 be replaced with a ball bearing?
how do i remove the old bearing and what is the replacement bearing?

PIKEMASTER

Posted 7/26/2011 7:40 AM (#508958 - in reply to #508946)
Subject: RE: hey pikemaster

Location: Latitude 41.3016 Longitude 88.6160

go to http://www.tackletour.net/TTForums/viewtopic.php?f=30&t=31669
that will show U how to change out the bearing and go to Mike's Reel Reair from Canada do get the bearing, ABU only sells the side plate with the bearing. U can go to ebay and find cheap side plates there that have the bearing in them also.
That bearing is called a one way bearing and ball bearings go both ways.

Lungemadness

Posted 7/26/2011 2:16 PM (#509024 - in reply to #508946)
Subject: RE: hey pikemaster

Posts: 152

Thanks alot for the info.

Killerbug

Posted 7/26/2011 3:49 PM (#509054 - in reply to #508946)
Subject: RE: hey pikemaster

Posts: 339

Location: Denmark

Changing the one way bearing is not especially easy ;), unless you have the right tools.

Jump to page : 1
Now viewing page 1 [30 messages per page]

Search this forum
Printer friendly version
E-mail a link to this thread