MuskieFIRST | WTB BRAID » Buy , Sell, and Trade

Muskie Discussion Forums

You are logged in as a guest. ( logon | register )

Moderators: Slamr	View previous thread :: View next thread
Jump to page : 1 Now viewing page 1 [30 messages per page] Muskie Fishing -> Buy , Sell, and Trade -> WTB BRAID

Message Subject: WTB BRAID

fatdad

Posted 1/6/2010 1:41 PM (#415838)
Subject: WTB BRAID

Posts: 219

WANTING TO TRY BRAID, REALLY DONT WANT TO BUY A BUNCH NEW AND MAY NOT LIKE IT... SO IF YOY HAVE SOME YOU ARE NOT USING OR HAVE SWITCHED TO A DIFFERANT BRAND ETC. LET ME KNOW NEED ENOUGH TO DO A COUPLE 6500S THANKS

Marshall

Posted 1/6/2010 5:09 PM (#415871 - in reply to #415838)
Subject: Re: WTB BRAID

Posts: 406

Location: Stones throw away...finally!!

You will probably be better off going and buying a 150 or 300 yd spool, for 20 or so bucks, than buying the leftovers on a spool and finding out you don't have enough after you put it on, but that's just me.

VMS

Posted 1/6/2010 5:12 PM (#415872 - in reply to #415838)
Subject: Re: WTB BRAID

Posts: 3483

Location: Elk River, Minnesota

With a couple of 6500's, you can spool them up with a 150 yard spool of a braid of your choosing. You would not need the entire spool filled with braid, but about 75 yards or so would do really well. And...going with a 150 Yard spool, you are not breaking the bank, and if you like the braid, and depending how much you fish and expose the line to the elements, etc. you can get a couple years or more out of it. So...I would agree with Marshall on this one...with the possibility of not getting enough line, you might spend money only to find you don't have enough...

Last braid I purchased was two years ago, and after a fair share of fishing one year, I just unspooled the braid, and turned it around.

Steve

fatdad

Posted 1/7/2010 3:52 AM (#415970 - in reply to #415838)
Subject: RE: WTB BRAID

Posts: 219

thanks guys i will just do that

Jump to page : 1
Now viewing page 1 [30 messages per page]

Search this forum
Printer friendly version
E-mail a link to this thread