MuskieFIRST | Tiller power cable » Muskie Boats and Motors

Muskie Discussion Forums

You are logged in as a guest. ( logon | register )

Moderators: Slamr	View previous thread :: View next thread
Jump to page : 1 Now viewing page 1 [30 messages per page] Muskie Fishing -> Muskie Boats and Motors -> Tiller power cable

Message Subject: Tiller power cable

setme31

Posted 11/4/2009 9:37 AM (#407616)
Subject: Tiller power cable

Posts: 516

Location: Kildeer, IL

The wiring cable that runs from my 1987 Evinrude 40 hp tiller to my battery is frayed pretty badly. It even had some trouble starting the last time I had her out.

Where can I get a replacement for this cable? Is it difficult to replace?

charlesb

Posted 11/6/2009 12:32 PM (#407944 - in reply to #407616)
Subject: RE: Tiller power cable

Posts: 111

Location: somewhere!

use a cheap set of jumper cables and some crimps from the hardware store.$25 tops .five times that at a service shop.be sure the jumper cables are the same gauge wire or larger than the exisiting power cables.that what i used on my last boat>

setme31

Posted 11/6/2009 2:30 PM (#407953 - in reply to #407616)
Subject: Re: Tiller power cable

Posts: 516

Location: Kildeer, IL

Great idea. Thanks.

Roughneck1860

Posted 11/9/2009 5:07 PM (#408215 - in reply to #407616)
Subject: Re: Tiller power cable

Posts: 295

Location: Southern Ontario, Detroit River and Lake StClair

Go to an electrical wholesale shop. You can get 6ga or 4ga wire for about $1.50/ft, and connecters for about $5 then your good to go.

Tim

Jump to page : 1
Now viewing page 1 [30 messages per page]

Search this forum
Printer friendly version
E-mail a link to this thread