|
|
Posts: 1887
Location: syracuse indiana | hey guy's i have a question, i redid one of my magic makers for my wife.. i stripped it down and foiled it and repainted it with a melal blue shiny paint. and i am putting the eye's back on it.. my question is.. i have these round mirirs that i want to put on the sides for more flash when she glides.. can i put them on before i epoxy coat it or should i just glue them on after.. i was wanting to put them under the coating to keep them on better.. what do you guys think....bill |
|
| |
|
Posts: 941
Location: Freedom, WI | I would put them on first. I put my soft molded eyes on before coating so they stay on and I think they look better also. |
|
| |
|
| Will the topcoat stick to the mirror? I'd do a test first to test for adhesion. If you don't the topcoat will chip off there and probably keep going. |
|
| |
|
Posts: 392
Location: KY | It will work with 2~3 coats of epoxy over them. Depending on how thick they are it may not smoot out completely. |
|
| |
|
Posts: 67
| LoL, I'm currently working on that same idea! The mirrors I'm using are 1/8'' thick. I've bored 1/4'' into the wood. I've applied liquid electrical tape on the back and sides of the mirrors ( hardens to the consistency of rubber to absorb in case of high impact) to prevent shattering.
I'm planning on covering the mirrors with etex till they're flush with the rest of the body, and once dry, coat the lure as usual. I suspect I'll need to sand the etex to even out the surface after the first coat on the whole lure.
Hopefully, will post pics some time next week. I don't know about you Bill, but this one's got me really excited.
s54 |
|
| |
|
Posts: 76
| Bill see me next weekend. I have an idea. |
|
| |
|
Posts: 1887
Location: syracuse indiana | ok don will do...bill |
|
| |
|
Posts: 1887
Location: syracuse indiana | well i was not realling wanting to bore into the bait.. its a magic maker and im not sure if boring it will take away from the bait. and the mirrors i have arenot that big maybee a inch around if that...bill
Edited by archerynut36 4/17/2009 4:03 PM
|
|
| |
|
Posts: 1887
Location: syracuse indiana | here is a pic of the bait i painted and the size of the mirror...bill
Attachments
----------------
 magic maker 2.JPG (15KB - 94 downloads)
magic maker.JPG (17KB - 100 downloads)
|
|
| |
