Muskie Discussion Forums
| ||
Moderators: Slamr | View previous thread :: View next thread |
Jump to page : 1 Now viewing page 1 [30 messages per page] Muskie Fishing -> Lures,Tackle, and Equipment -> llungen Squirko |
Message Subject: llungen Squirko | |||
Esoxmtk |
| ||
Posts: 129 Location: Glenmoore PA | I picked up a llungen squirko this winter and I gave it a try a few weeks ago. I was a little disappointed with its action. I was trying to fish it like a manta or a hell hound but there wasn't a lot of action out of the lure. How do you guys work a squirko, do you like it? Have you had any success with it? Thanks. | ||
MikeHulbert |
| ||
Posts: 2427 Location: Ft. Wayne Indiana | you have to work it with SLACK line, and last 6 inches of the snap are most important. Much like a Weagle underwater. The Squirko's are one of the best jerkbaits out there. Learn to use them correctly and you'll love them! Short quick SNAPS of your rod tip with slack line. | ||
Pete Stoltman |
| ||
Posts: 663 | What Hulbert said. Take the time to get familiar with that bait and you'll love it. The Squirko has produced for me on days when nothing else even got a sniff. | ||
DH.Pare |
| ||
Posts: 288 Location: Montreal, Que. Canada | Pete, Why aren't they on the Musky armor site? David | ||
Esoxmtk |
| ||
Posts: 129 Location: Glenmoore PA | thanks for the info and responses. Will have to give it another proper try. | ||
MuskyFix |
| ||
I talked with keith about them a couple times, they are awesome baits, when nothing else is working they work. if the tail is stiff it may act like a rutter and keep the bait from kicking off to the side. some times you need to add a weight in front of the tail to get the back down, this will cause it to swing out. Good Luck | |||
Pete Stoltman |
| ||
Posts: 663 | David, I'm not sure. Guess you'd have to ask them. We just got in a new shipment at R&H including some new colors. They are very cool. | ||
Esoxmtk |
| ||
Posts: 129 Location: Glenmoore PA | How would you add weight to the front of the tail? Edited by Esoxmtk 4/1/2009 9:16 AM | ||
esox50 |
| ||
Posts: 2024 | Maybe slip a nail in there, then seal it with glue or something? | ||
MuskyFix |
| ||
What you do is slowly remove the tail without ripping it. it can be reused. next drill a hole in the plastic with a large drill bit, if it doesn't have a weight in it, it is a older version. the new ones have weights in them that make them run better. insert a small egg sinker into the hole and epoxy over it, clean off or scrap around the area, I did this to all my old ones or turned jerko's into squirko's and they really check the mirrors if you know what I mean. re super glue the tail back on. You could also pour lead into the hole, if it's to much drill some of it out. Don't forget to work it just like Mike Hulbert said. Edited by MuskyFix 4/4/2009 7:50 AM | |||
MuskyFix |
| ||
Here's what it may look like Good Luck Attachments ---------------- weighted.jpg (51KB - 86 downloads) | |||
archerynut36 |
| ||
Posts: 1887 Location: syracuse indiana | what size egg sinker did you use for that fix???...bill | ||
MuskyFix |
| ||
it may have been 1/8 oz ? | |||
Jump to page : 1 Now viewing page 1 [30 messages per page] |
Search this forum Printer friendly version E-mail a link to this thread |
Copyright © 2024 OutdoorsFIRST Media |