|
|
Posts: 102
Location: Bowling Green, KY | Any body have any experience with these? I recently remounted my TM with
rubber isolator bolts and it was the biggest mistake I've made in a while. My TM
flopped around, couldn't seem to keep the bolts tight and now one is broke. They
are terrible, at least on an aluminum boat. Maybe the deck material is too thin, I
don't know. There was no warning on the package against their use on a tin boat.
I was wondering if the minn kota version was any better. Also, what size hole do
they use? I can hardly get my fat arm in through that little bow panel in the front
so something like this would be nice. Thanks in advance, Roger London. |
|
| |
|
Posts: 32954
Location: Rhinelander, Wisconsin | I would recommend using bolts and nylock nuts or high quality lock washers, especially if you run rough water at all. |
|
| |
|
Posts: 102
Location: Bowling Green, KY | It shall be done. Now I just have to come up with skinnier arms. Haaa. |
|
| |
|
Posts: 1663
Location: Kodiak, AK | No kidding! I almost got my arm stuck mounting mine. |
|
| |
