MuskieFIRST | external gps antenna mount » Muskie Boats and Motors

Muskie Discussion Forums

You are logged in as a guest. ( logon | register )

Moderators: Slamr	View previous thread :: View next thread
Jump to page : 1 Now viewing page 1 [30 messages per page] Muskie Fishing -> Muskie Boats and Motors -> external gps antenna mount

Message Subject: external gps antenna mount

B.Mirro

Posted 8/14/2008 12:02 PM (#331403)
Subject: external gps antenna mount

Posts: 89

background: Just bought humminbird GPS Graph with external GPS ... I now have the white GPS puck to install on the boat. The bottom part of the puck is open and wires are exposed. because I am mounting it flush to the interior of boat with wire coming out the side as oppose to drilling thro aluminum

For boats where you can't hide the wire underneath, this is how your suppose to use it. Which is my predictmanet

Question:

Do you glue this and then seal it up for no moisture? And locations, I've seen the white puck towards the transom? Probably where I will start.

Edited by B.Mirro 8/14/2008 12:04 PM

ESOX Maniac

Posted 8/14/2008 8:01 PM (#331493 - in reply to #331403)
Subject: RE: external gps antenna mount

Posts: 2754

Location: Mauston, Wisconsin

Whoa!!! What do you mean by: "because I am mounting it flush to the interior of boat". Just do a search here on MF for "GPS Puck Mounting". The Puck is the antenna, it needs to mounted where it has a free view of the "sky". I'd call Humminbird & ask them for recommendations based on your specific boat model before I drilled hole #1........

Al

Jump to page : 1
Now viewing page 1 [30 messages per page]

Search this forum
Printer friendly version
E-mail a link to this thread