MuskieFIRST | Bowmount install with Boat in the water? » Muskie Boats and Motors

Muskie Discussion Forums

You are logged in as a guest. ( logon | register )

Moderators: Slamr	View previous thread :: View next thread
Jump to page : 1 Now viewing page 1 [30 messages per page] Muskie Fishing -> Muskie Boats and Motors -> Bowmount install with Boat in the water?

Message Subject: Bowmount install with Boat in the water?

B.Mirro

Posted 6/24/2008 9:05 AM (#323546)
Subject: Bowmount install with Boat in the water?

Posts: 89

Has anyone ever done this?

Shep

Posted 6/24/2008 10:17 AM (#323558 - in reply to #323546)
Subject: RE: Bowmount install with Boat in the water?

Posts: 5874

Shouldn't be a problem. Biggest concern would be dropping a tool or hardware into the drink.

B.Mirro

Posted 6/24/2008 10:23 AM (#323559 - in reply to #323558)
Subject: Re: Bowmount install with Boat in the water?

Posts: 89

or that one screw! LOL Thanks.

Shep

Posted 6/24/2008 11:09 AM (#323567 - in reply to #323559)
Subject: Re: Bowmount install with Boat in the water?

Posts: 5874

One thing that makes it a bit easier if you have limited access under the bow is to use some RTV on the nut and washers to stick them together on a box end wrench. Keeps them together, and from falling down into the bowels of your hull, when you are reaching in the by feel.

Good luck and don't drop anything over the side!. hehehe

Jump to page : 1
Now viewing page 1 [30 messages per page]

Search this forum
Printer friendly version
E-mail a link to this thread