Muskie Discussion Forums

Forums | Calendars | Albums | Quotes | Language | Blogs Search | Statistics | User Listing
You are logged in as a guest. ( logon | register )
Moderators: Slamr

View previous thread :: View next thread
Jump to page : 1
Now viewing page 1 [30 messages per page]

Muskie Fishing -> Muskie Boats and Motors -> ranger 619 speed ?
 
Reply New post
Message Subject: ranger 619 speed ?
Guest
Posted 2/15/2008 12:45 PM (#301287)
Subject: ranger 619 speed ?


thinking about buying a 2005 619 it gots a 200 yam hpdi curious what the speed on this boat would be thanx
bulldawger
Posted 2/15/2008 12:50 PM (#301289 - in reply to #301287)
Subject: RE: ranger 619 speed ?


propped right you should hit 55-58 top speed
Shep
Posted 2/15/2008 1:50 PM (#301306 - in reply to #301289)
Subject: RE: ranger 619 speed ?





Posts: 5874


I'd say with a typical load, and propping for best overall performance, you're looking at 51-54. I've been in several of the pre-2007 619's, and not a one has gone 55. And that was with a 200 Opti. The HPDI is a good motor, but not quite as fast as the Opti or the ETEC.

Now, you could prop it for top speed, but your holeshot will suffer, and your RPM's may be down a bit.

Edited by Shep 2/15/2008 1:51 PM
bulldawger
Posted 2/15/2008 1:59 PM (#301307 - in reply to #301287)
Subject: RE: ranger 619 speed ?


that's funny, I have been in an 05, with 200 evinrude that I saw 57 on gps with 2 guys, full gear, half tank of gas and it has plenty of hole shot.
Shep
Posted 2/15/2008 2:08 PM (#301308 - in reply to #301307)
Subject: RE: ranger 619 speed ?





Posts: 5874


What's funny? Best I'd seen was 54. If 57 was tops, then why do you say 58?

Either way, I bet you can't tell the difference between 54 and 57 without looking at a GPS.
Pedro
Posted 2/15/2008 2:39 PM (#301311 - in reply to #301287)
Subject: Re: ranger 619 speed ?





Posts: 670


Location: Otsego, MN
I've fished out of the same set up since 05'. seen 56 once with no gas and calm usually 53-55.
Guest
Posted 2/15/2008 4:43 PM (#301337 - in reply to #301287)
Subject: RE: ranger 619 speed ?


thanx for the info guys some were in the mid 50s it sounds like
ESOX Maniac
Posted 2/15/2008 4:51 PM (#301338 - in reply to #301287)
Subject: RE: ranger 619 speed ?





Posts: 2753


Location: Mauston, Wisconsin
Shep- OK buddy- I now know why I have such a crappy hole shot & low RPM on my Skeeter at full throttle, i.e., it's propped for speed. See, I do learn something when I read your threads. Yeah, being a 60's gearhead, I'll keep it. Although the current price of gas tells me I'm better off running at even lower RPM. Strange as it seems, my daily gas consumption in is the same if I'm running & gunning or if I'm trolling all day.


BTW: How much do two (2) guy's and their gear weigh? If I were thinking a couple ToddM's, that could be a bit. Even though he looked pretty svelte at the MilW. Muskie Expo. Now, two Lee Tauchen's & a limit of 5 lures a piece might be different.

Have fun!
Al
Mikes Extreme
Posted 2/15/2008 5:02 PM (#301340 - in reply to #301337)
Subject: RE: ranger 619 speed ?





Posts: 2691


Location: Pewaukee, Wisconsin
All of the 619's I have fished out of were in the low to mid 50's. Very similar to my 620VS. People will talk up their rides a few MPH for some reason BUT who really cares about one 1 or 2 mph at top end. I care more about the hole shot then the top end. Getting out of the hole fast is much more impressive then slowly getting ahead of someone at top end.
Troyz.
Posted 2/18/2008 11:27 AM (#301802 - in reply to #301340)
Subject: RE: ranger 619 speed ?




Posts: 734


Location: Watertown, MN
My partner runs the 06 619 200 XS Opti, top speed was 51-52. I have talked to walleye guy getting up 50's at great cost, putting jackplate and playing with props. So that being said 50-54 would be typical to end pending number batteries, equipment, and other misc load, yes you can play with props and jackplates to get a few more mph.

Troyz
Guest
Posted 2/19/2008 9:03 PM (#302308 - in reply to #301287)
Subject: RE: ranger 619 speed ?


You can get a few more mph out of any hull including the 619 by turning a bigger prop. BUT sometimes I see people boasting about getting a few more mph than others and not realizing they are not getting enough RPM's. If you are at WOT and not getting anywhere close to the redline it can lug the motor and give you problems down the road.
GMan
Posted 2/21/2008 9:22 AM (#302757 - in reply to #301287)
Subject: RE: ranger 619 speed ?





Posts: 479


Location: Eden Prairie & Pine Island
I have a 2001 619 with a 200 Evinrude, and with my performance prop can easily get 58 with two guys, gear, gas, etc. The prop is a Renegade 13 1/2 X 23 four blade and the hole shot is good, too.
dawger
Posted 2/21/2008 9:26 AM (#302758 - in reply to #301287)
Subject: RE: ranger 619 speed ?


good stuff gman.
finally an actual owner to chime in . 58. huh, guess I wasn't crazy
tuffy1
Posted 2/21/2008 8:33 PM (#302922 - in reply to #302758)
Subject: RE: ranger 619 speed ?





Posts: 3240


Location: Racine, Wi
Man, and I thought boat speed was measured in knots. Where have I been.
MuskyJay
Posted 2/21/2008 9:20 PM (#302936 - in reply to #302922)
Subject: RE: ranger 619 speed ?





Posts: 734


I have an 03 619 with a 200 Optimax, no kicker and go about 52-53 at most. I am sure with a different prop I would do 55. Plenty fast enough!
Maybe I am slow because of the full windshield though.


Guest
Posted 2/21/2008 10:07 PM (#302952 - in reply to #301287)
Subject: RE: ranger 619 speed ?


thanx for the info guys I was just curious about the speed. I actually just bought the 619 2night that I was refering 2. And I feel like I won the lottery It is a 2005 got it at the auction for $10200 I have been so pumped up all night I keep going out 2 the garage to make sure it is still there!!!!
kevin cochran
Posted 2/21/2008 10:21 PM (#302955 - in reply to #301287)
Subject: Re: ranger 619 speed ?




Posts: 374


Location: Bemidji
10,200 for an '05 619! I'll take two.
Guest
Posted 2/21/2008 10:28 PM (#302957 - in reply to #301287)
Subject: RE: ranger 619 speed ?


Where is this auction you speak of?
Guest
Posted 2/21/2008 10:30 PM (#302958 - in reply to #302955)
Subject: Re: ranger 619 speed ?


ya I still cant believe it on the way home my girl freind said there is no trolling motor! Ah darn. that is about the worst of it the boat is clean. I was told by my buddy that it should go for twenty for sure. He was biddding on it for me and I heard 10200 going going sold!!!!! so at that price was not 2 worried about the speed.
jonnysled
Posted 2/22/2008 12:20 AM (#302982 - in reply to #302952)
Subject: RE: ranger 619 speed ?





Posts: 13688


Location: minocqua, wi.
Guest - 2/21/2008 10:07 PM

thanx for the info guys I was just curious about the speed. I actually just bought the 619 2night that I was refering 2. And I feel like I won the lottery It is a 2005 got it at the auction for $10200 I have been so pumped up all night I keep going out 2 the garage to make sure it is still there!!!!


i believe i'd have my sleeping bag on the front deck if she were in my garage ... that first night you want to make sure she's comfortable.

congratulations man! .... i'm dreaming of the day the same happens for me!!
Shep
Posted 2/22/2008 10:34 AM (#303050 - in reply to #302982)
Subject: RE: ranger 619 speed ?





Posts: 5874


Congrats! Wow, what a deal! Bank repo auction? At that price, who cares if it goes 52 or 58!

I tipped a guy on a 04 621 with a 250 Evinrude. He got it for $26K! From a bank. I still think I should have bought it. Had less than 40 houres on it. Was full of dog hair, and filthy dirty. But it cleaned up really nice.

Enjoy your new boat!
Jump to page : 1
Now viewing page 1 [30 messages per page]
Reply New post
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete all cookies set by this site)