Muskie Discussion Forums

Forums | Calendars | Albums | Quotes | Language | Blogs Search | Statistics | User Listing
You are logged in as a guest. ( logon | register )
Moderators: Slamr

View previous thread :: View next thread
Jump to page : 1
Now viewing page 1 [30 messages per page]

Muskie Fishing -> Muskie Boats and Motors -> trolling motor size info needed...
 
Reply New post
Message Subject: trolling motor size info needed...
Reef Hawg
Posted 3/27/2007 3:46 PM (#247505)
Subject: trolling motor size info needed...




Posts: 3518


Location: north central wisconsin
Just wondering if anyone with a Ranger 690 could chime in here and tell me what trolling motor shaft length/lb thrust they are using with success. The rig has a maxum 74 lb on it now that I plan to sell with the removable plate. I would like to get an auto-pilot but see that the regular auto-pilot is only offered in a 70lb version, and I'd have to go up to the Terrova to get the 80lb. have no experience with the Terrova, and wonder if anyone has any experience with them. I would rather have 80, but not sure if the extra $$ for the Terrova is well spent...

Thanks in advance.

Edited by Reef Hawg 3/27/2007 5:17 PM
Lockjaw
Posted 3/28/2007 4:14 AM (#247578 - in reply to #247505)
Subject: RE: trolling motor size info needed...





Posts: 147


Location: WI - Land of small muskies and big jawbones
I don't have a 690 but if I did I would go with a 60" shaft and look for an 80lb that someone might have for sale or a dealer that may still have one on clearance. MK just came out with the 80lb power drive a couple years ago. I don't understand why they quit making it already.
bn
Posted 3/28/2007 9:17 AM (#247612 - in reply to #247505)
Subject: RE: trolling motor size info needed...


go with the 80 lb Terrova w/ 60" shaft ...
or you can call some minn kota dealers and they can check the reconditioned list you could probably get an auto pilot 80"er for a good deal..they come with warrantys and look basically new

Mark H.
Posted 3/28/2007 11:22 AM (#247639 - in reply to #247612)
Subject: RE: trolling motor size info needed...




Posts: 1936


Location: Eau Claire, WI
Jason,

On my old 690 VS, I ran a 54 inch 65 pound thrust Maxxum because that is what was put on it 2 mos. prior to me purchasing the unit. It worked just fine, I was never short on power and the only time I was a little short on length was in some really rough stuff on Mille Lacs that quite frankly I shouldn't have been fishing in anyway.

That being said. IMHO, anything over 65lb. thrust should work just fine for you. I would suggest the 60 inch shaft.
MikeHulbert
Posted 3/28/2007 6:24 PM (#247729 - in reply to #247505)
Subject: Re: trolling motor size info needed...





Posts: 2427


Location: Ft. Wayne Indiana
I have the new Terrova 80 pound, 60 inch shaft and LOVE IT.

It turns faster than a Powerdrive and it rocks!
PANTLEGGER
Posted 3/29/2007 6:28 AM (#247811 - in reply to #247505)
Subject: Re: trolling motor size info needed...




Posts: 176


Location: Tomahawk, WI
i have a 690 with 36v 101# Maxxum 60" shaft, i could pull a water skier. Overkill? maybe a little, i agree with Mike and Brad on the 80# 60" shaft 24v. The only thing i dont like on mine is the extra (heavy) battery required with a 36v, now a mouse could not even fit in my battery compartment. On the other hand, with a 36v my charges will last longer.

Mike
Reef Hawg
Posted 3/29/2007 2:44 PM (#247894 - in reply to #247505)
Subject: RE: trolling motor size info needed...




Posts: 3518


Location: north central wisconsin
Thanks guys. I will probably go with the Terrova, simply because I have to, to get the thrust I require. It seems I am basically forced into the Terrova to get the thrust, even though I don't want/need the pedal it comes with. Mike H., the new power drives/auto pilot v2's have the faster turning too. I asked Chuck Brod(our local Minn Kota guru) about it yesterday afternoon. How high/tall is that Terrova pedal? Which steering controls do you use most frequently on it? That is one nice feature that I have longed for. I would suspect that that feature alone could sway some cable drive folks to electric steer models.

Hey, anyone have any experience + - with the power steer Motor Guides in the 24 vlt higher thrust models?

Thanks.
MikeHulbert
Posted 3/29/2007 6:23 PM (#247917 - in reply to #247505)
Subject: Re: trolling motor size info needed...





Posts: 2427


Location: Ft. Wayne Indiana
The pedal isn't much higher than the old Powerdrive pedals. I really like it alot. If I am fishing from the front, I use the two back "tap" buttons. If I am guiding, I use the rocker pedal.

You will like it, trust me.
Reef Hawg
Posted 3/30/2007 7:26 AM (#247988 - in reply to #247505)
Subject: RE: trolling motor size info needed...




Posts: 3518


Location: north central wisconsin
Thanks man!
Jump to page : 1
Now viewing page 1 [30 messages per page]
Reply New post
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete all cookies set by this site)