|
|
Posts: 181
| Do any of you guys know where I can buy giant colorado's similar to the cowbell that MM was useing on the original cowgirl? It seems that the manufacturer went our of business that was building them. If I can't find anywhere to buy these I'm going to make them myself, only problem is I can only get my stainless in 48"x96" sheets. That will get me at least 400 blades if not closer to 500 if I take my time programing, anyone interested in these let me know if it's worth the effort through a pm. I think it will cost around $1.50 each according to my best guess. I won't know for sure until I find out how many manhours I have into this. I would much rather just buy them as I only need about 10 or 15 blades.
I've tried stamina already thats who said the manufacturer went out of business. |
|
| |
|
| I may be intested in a few but only like 10-20. |
|
| |
|
Posts: 786
Location: Minnesota | not that it helps right now but, i may be making a die for the large #10 soon. i will let you know.
In the mean time call dick moore. moores lures. he may have some |
|
| |
|
Posts: 479
Location: Eden Prairie & Pine Island | Moores Lures sells those blades as does Thornes. |
|
| |
|
Posts: 29
| Are the large blades in his catalog called the magnum ten the same as you are talking or are they a special order item. The original cowgirl had a way bigger blade than a number ten. |
|
| |
|
Posts: 181
| Thanks Ranger 620 and Gman, I have #10's, those are easy, I'm looking for the approximately 4"x2" long cowbell blades. #10's are nothing new Musky Safari tackle has been useing them for at least 4 or 5 years on his bucktails, and thats just when I found his baits, no clue how long he started making them before that. I really don't understand the big hype over the company's that sell them now heck I believe that Rollies sells Musky Safari bucktails for $17! What did you pay for the other guys stuff? Oh yea compare the wire on the big name baits to the ones I'm talking about, No Comparison at all! |
|
| |
|
Posts: 121
| Try staminainc.com. They list a Mega Blade...4 1/8 X 2 3/8. Only listed in 5 colors. |
|
| |
|
Posts: 121
| Just re-read your original post. The blades I was talking about are in the 2006 catalog. |
|
| |
|
Posts: 574
| the #10s you get from stamina are about 3 by 1 and 3/4. The #10s you get from rollies are much smaller. I even bought 11s from rollies, got them in the mail and the're smaller than the Stamina 10s
Double Cowgirls use the stamina sized 10s |
|
| |
|
Location: The Yahara Chain | As baitmaker66 mentioned, Stamina sells a mega blade. It is much larger than the #10's. It might be what you are looking for. |
|
| |
|
Posts: 169
| I've ordered the Mega Blades from Stamina before, but I don't see them in the 2007 catalog, or on their web site. |
|
| |
|
Posts: 1461
Location: Kronenwetter, WI | I think they may have discontinued....I have a couple left from last year. Have a picture up now on buy/sell/trade....yup...they're rare now days. |
|
| |
|
Posts: 181
|
Thanks for trying, also thanks for the hint on the difference in sizes from rollies and stamina that saved me a headache 
Edited by jnelson 1/20/2007 10:14 PM
|
|
| |
|
Posts: 121
| In the Stamina catalog they list #10 colorado blades under Muskie Spinner Blades, but I don't know how big they are. |
|
| |
|
Posts: 786
Location: Minnesota | jnelson
You also might try emailing Musky Mahyem and ask them? They may even have some left from the old days?
[email protected]
|
|
| |
|
| Those blades were originally stamped by River Run. They are out of business.
Dick |
|
| |
|
Posts: 1243
Location: Musky Tackle Online, MN | Musky Mayhem quit making the 15" Cowgirl because they could no longer find the blades.
Aaron |
|
| |
|
| Wonder what Muskiemachienery could do with one of those Blades I'll defiantly be needing a few J |
|
| |
|
Posts: 169
| I've ran a mega blade on my spinnerbait before, but even at 14oz+ it still rides pretty high in the water, & pulls like a mule!
Here's a picture
http://muskie.outdoorsfirst.com/board/forums/get-attachment.asp?att... |
|
| |
|
Posts: 181
| blades are cut!!! Bent Friday! |
|
| |
|
Location: Minnesota | hey i may take a few 10-20?? let me know when you can
thanks |
|
| |
|
Posts: 181
| then I went to the fab shop and saw that the boys scratched them all up!!  I have to try and buff them this project may have died sorry guys! |
|
| |
|
Posts: 21
| I know they are not Colorado, but the BIGGEST blades I've ever seen are on the Gibbs-Nortac "JUMBO WILLOW LEAF TROLL".
The willows are 5 1/4" X 3", and the Indianas (Bear Valley) are 4" X 3". I don't know if they will sell just the blades.
http://www.gibbsfishing.com/products/jumbowillowleaf.asp |
|
| |
|
Posts: 1348
Location: Pewaukee, WI | Even if you are unable to buff them out I may be interested in a dozen or so. I'll just paint them. E-mail me the details at:
[email protected]
Gerry Carroll |
|
| |
|
Posts: 121
| I would also be interested in a few. I will just dye them. Let me know.
Ben
[email protected] |
|
| |
|
Location: MN | Count me in also. Thanks
[email protected] |
|
| |
|
Posts: 121
| What happened to the blades??? |
|
| |
