Muskie Discussion Forums

Forums | Calendars | Albums | Quotes | Language | Blogs Search | Statistics | User Listing
You are logged in as a guest. ( logon | register )
Moderators: Slamr

View previous thread :: View next thread
Jump to page : 1
Now viewing page 1 [30 messages per page]

Muskie Fishing -> Muskie Boats and Motors -> Old Gas
 
Reply New post
Message Subject: Old Gas
Nick59
Posted 7/8/2005 9:33 AM (#152997)
Subject: Old Gas





Posts: 548


Location: MN
Just purchased a new to me Lund with built in tank. There is about 15 gallons of last years gas left in the tank. It was not treated. Seems to run OK. Should I take it out and run it in the lawn mower, or just use as is. The motor is a 94 Merc 75.

Thanks,
Nick
mikie
Posted 7/8/2005 9:52 AM (#153001 - in reply to #152997)
Subject: RE: Old Gas





Location: Athens, Ohio
If you have to ask, then you already suspect there is a problem. Follow your instincts. You may be able to dispose of the old gas at a used oil recycler or at a household waste day (why gum up the mower motor?). m
BALDY
Posted 7/8/2005 10:08 AM (#153003 - in reply to #152997)
Subject: RE: Old Gas




Posts: 2378


throw some new gas and some SeaFoam in there and run it out. shouldnt hurt.

Disclaimer: I am by no means a motor expert.
Mark H.
Posted 7/8/2005 10:48 AM (#153015 - in reply to #152997)
Subject: RE: Old Gas




Posts: 1936


Location: Eau Claire, WI
I'll second what Baldy said. Bad gas has a certain odor to it, you'll know it if you ever smell it, almost like turpintine.

Add a can of Seafoam, fill the tank and run it down to 1/4 tank and from then forward always ensure you use a fuel stabilizer. Additional additives you may want to cosider once or twice a season depending on how much you use your motor are: Seafoam, for fuel system and top cylinder cleaning and lubrication. Ring-Free to help prevent carbon deposit build up on the rings. This applies to both two and four stroke motors.

I personally use Seafoam every other tank and one bottle of ring-free per season for good preventative maintenance. You can purchase Seafoam and any auto parts store, most marine dealers, and Farm & Fleets. You can purchase Ring-Free at most marine dealers since Yamaha and Merc recommend it's use.

Merc ELPTO 60's and 75's have been great motors, very reliable and good longentivity. If it's a four stroke, it is most likely a Yamaha power head in that era. They too are good motors.

Hope this helps.
kevin
Posted 7/8/2005 6:52 PM (#153060 - in reply to #152997)
Subject: RE: Old Gas





Posts: 1335


Location: Chicago, Beverly
Use Bombardier 2X4 Fuel Stabilzer regardless of what brand the engine is... I have never had a tank go bad on me yet... Also, if possible try and siphen or drain some of that into your vehicle and/or mower(is the gas premixed or straight gas?) If premixed skip the vehicle thing... How long has it been in the tank? A few months? Last fall? Might not be too bad yet... Last summer, a couple years? yeah, try and drain some out then mix fresh stuff with the rest... Definitely run some engine cleaner through it along with the Fuel Stabilizer...
archerynut36
Posted 7/10/2005 9:04 PM (#153120 - in reply to #152997)
Subject: RE: Old Gas





Posts: 1887


Location: syracuse indiana
well as i have learned in a special way..lol DRAIN THAT TANK. do not use that gas in that motor. u see gas may not go bad if it was treated but it will loose octane. and that will hurt the motor. kevin is a omc kind of guy but i run mercury and their quickclean is some awsome stuff. i would drain that gas and run it in a lawnmower. fill it up and put in 1 ounce per 6 gal of gas. also u can go to www.bassboatcentral.com and go to sherm's merury board and learn alot there those guys know their stuff.. also the quickclean is kinda pricy usually 8 bucks for a 12 fl oz bottle..but worth every penny.. seafoam is verry good stuff too. i have used it in other motors with good results.....bill

BUT REMEMBER STABILLIZER DOES NOT PROTECT THE OCTANE ONLY GAS BREAKDOWN

Edited by archerynut36 7/10/2005 9:06 PM
Jump to page : 1
Now viewing page 1 [30 messages per page]
Reply New post
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete all cookies set by this site)