MuskieFIRST | Esox Magnum/Suzuki 60 hp prop » Muskie Boats and Motors

Muskie Discussion Forums

You are logged in as a guest. ( logon | register )

Moderators: Slamr	View previous thread :: View next thread
Jump to page : 1 Now viewing page 1 [30 messages per page] Muskie Fishing -> Muskie Boats and Motors -> Esox Magnum/Suzuki 60 hp prop

Message Subject: Esox Magnum/Suzuki 60 hp prop

Gary Stay

Posted 9/10/2024 2:11 PM (#1030737)
Subject: Esox Magnum/Suzuki 60 hp prop

I know a lot of guys struggle with porposing on the tiller Esox Magnums. I've found that a Solas Amita 4 in the 13 1/4"D x 13" P gives me lots of trim to work with. It's not the fastest top end, (31 mph) but the holeshot and ability to hold on plane down to about 14 mph is what works for me. No need to trim down to get that good holeshot either. I don't know what my RPM' s are at wot, I don't have a tach but I don't doubt that a guy could step up to a 15" pitch to gain a little speed if wanted and still control porposing with a decent holeshot. I never run wot anyway and this combo works perfect cruising at 23-25 mph which is where run it. Hope this helps someone.

Gary Stay

Posted 9/10/2024 2:15 PM (#1030739 - in reply to #1030737)
Subject: RE: Esox Magnum/Suzuki 60 hp prop

Forgot to mention that the Amita 4 is aluminum

Jump to page : 1
Now viewing page 1 [30 messages per page]

Search this forum
Printer friendly version
E-mail a link to this thread