MuskieFIRST | upgrading clips on standard board OR-30 » Lures,Tackle, and Equipment

Muskie Discussion Forums

You are logged in as a guest. ( logon | register )

Moderators: Slamr	View previous thread :: View next thread
Jump to page : 1 Now viewing page 1 [30 messages per page] Muskie Fishing -> Lures,Tackle, and Equipment -> upgrading clips on standard board OR-30

Message Subject: upgrading clips on standard board OR-30

25homes

Posted 6/27/2019 10:42 AM (#941410)
Subject: upgrading clips on standard board OR-30

Posts: 983

I use the offshore tackle boards just their standard board not the bigger ones. They work well but want to upgrade the clips. I got the new Red clips with pin in them easy to change no problem. I ordered OR-30 clips and they look great but they have the brass fitting in both holes on the clip and the screw that goes through the original orange clip wont fit through the OR-30 clip with the brass in it. Has any one done this? Did you just get a slightly smaller screw that will fit through the clip? Try and remove the brass fitting inside the whole? I know tons of ppl upgrade clips so just curious to best plan of action

Jerry Newman

Posted 6/27/2019 3:53 PM (#941430 - in reply to #941410)
Subject: RE: upgrading clips on standard board OR-30

Location: 31

I'd recommend a trip to the hardware store to get the smaller stainless steel bolts and nylon locking nut.

ToddM

Posted 6/27/2019 5:58 PM (#941435 - in reply to #941410)
Subject: Re: upgrading clips on standard board OR-30

Posts: 20219

Location: oswego, il

I bought the OR-18 latch clip and arms and put them on my church boards. I really like them.

Jerry Newman

Posted 6/27/2019 10:06 PM (#941440 - in reply to #941435)
Subject: Re: upgrading clips on standard board OR-30

Location: 31

Ya, I didn't like the clips that came with the large church boards, so I changed them out to the same clip configuration as the offshore boards.

Zoom - | Zoom 100% | Zoom + | Expand / Contract | Open New window

Click to expand / contract the width of this image

(Boards- (1).jpg)

Attachments
----------------

Boards- (1).jpg (53KB - 423 downloads)

Jump to page : 1
Now viewing page 1 [30 messages per page]

Search this forum
Printer friendly version
E-mail a link to this thread