|
|
Posts: 103
| I would like to try some for leaders. Any recommendations?
Thx |
|
| |
|
Posts: 4343
Location: Smith Creek | I had some success with knot to kinky. Haven't used it enough or caught enough fish to say if it's better than heavy fluoro. |
|
| |
|
Posts: 386
| I've used the Cortland stuff for pike fly fishing. Used a knot from a YouTube vid and that works pretty decent. Think the vid was posted by Wildwood Float trips - believe it was about musky fly fishing leaders. Haven't had any fish bigger than 22" to really put it to the test though. |
|
| |
|
Posts: 2269
Location: SE, WI. | American fishing wire...AFW...49 strand, coated.... I use the 40lb, 60lb, and the 90lb/ Uncoated, but Most leader material ties up just fine. JD |
|
| |
|
Posts: 572
| jdsplasher - 3/3/2017 4:32 PM
American fishing wire...AFW...49 strand, coated.... I use the 40lb, 60lb, and the 90lb/ Uncoated, but Most leader material ties up just fine. JD
What knot do you use for this? |
|
| |
|
Posts: 2269
Location: SE, WI. | Muddy; I get lots of people asking this question...but don't remember the name. Learned it from my dad many moons ago. Never had it fail. Dad was an arborist, and new many knots. I plan on doing a video of the procedure because of the many requests on how.....OR, you can call me and I would take you through it...really simple...and use it for all flexible stranded wire leaders. JD |
|
| |
|
Posts: 16632
Location: The desert | I've used tyger wire for sucker rigs in the past. |
|
| |
|
Posts: 103
| Thx everyone. I would use it mainly for sucker rigs. I will sniff around tomorrow at the Wausau expo |
|
| |
|
Posts: 1144
Location: Minnesota. | muddymusky - 3/3/2017 5:46 PM
jdsplasher - 3/3/2017 4:32 PM
American fishing wire...AFW...49 strand, coated.... I use the 40lb, 60lb, and the 90lb/ Uncoated, but Most leader material ties up just fine. JD
What knot do you use for this?
I'm a fly guy so I use the Ablright to attach the wire to the end of my fly line. May or may not mean anything to you and musky line. YMMV there..
For the knot to the bait try this guy, it's excellent and SIMPLE!!
It's called a Jig Loop. Tie an overhand knot about 3" from the end of the wire tippet BUT don't pull it totally shut. (Leave it "just loose enough" to insert the end of this wire back into.) Now put the tag end into the hook eye.
Now push this tag end through that overhand knot...that you left loose "enough" but not too loose, right? Now, take and make a 1/2 hitch just behind that overhand knot and snug it up.
Make a second 1/2 hitch again behind this one but this time pull her tight with a pair of pliers!
Done! If it turned out right..and sometimes it doesn't, depending on how tight that overhand knot was...you'll end up with a neat little "jig loop" that your fly can swing freely on!!! |
|
| |
|
Posts: 2269
Location: SE, WI. | Jeremy, very good...that's it...and yes, very well explained. As my dad explained it, rabbit came up the hole, ran around the tree, then back down the hole:)And yes Jeremy, once you put the tag end through the overhand knot hole, adjust, and snug up that overhand knot....this tightens the knot up real nice and small,(tight)!!!!!! Sometimes, and I rarely use the second half hitch, but it is totally fine. Just adds a bit more bulk, which is not much and really secures the deal!!! After the going through the open loop, and cinching the first half hitch, I put a tiny bit of superglue on the first knot to hold it, then afterward I may put the second half hitch in. A visual would make it easier for people to tie, because there are some detail to make it right every time...practice with some mono, so you don't kink up a bunch of leader wire trying to make it right! JD |
|
| |
|
Posts: 298
Location: Not where I want to be! | I think the link below is what Jim is talking about. It's the one I recall as the rabbit deal. Called a bowline Knot. http://www.animatedknots.com/bowline/index.php?Categ=typeendloops&LogoImage=LogoGrog.png&Website=www.animatedknots.com#ScrollPoint |
|
| |
|
Posts: 2269
Location: SE, WI. | Thanks Ron, I don't have to make a video now...been a few years since working with dad and hauling brush, and forgetting all the names of knots I've learned  The bowline was a knot I used a lot, and just started tying leaders many moons ago with that knot. I still think there are some keys to getting every thing small and tight, which the Video doesn't show you, but yes that's it!!!! JD |
|
| |
|
Posts: 2269
Location: SE, WI. | Here you go MO-16. Now the post is right next to yours! JD |
|
| |
|
Posts: 2269
Location: SE, WI. | Here u go Greg, try this bowline knot. JD |
|
| |
|
| Flambeauski - 3/3/2017 1:27 PM
I had some success with knot to kinky. Haven't used it enough or caught enough fish to say if it's better than heavy fluoro. what's the difference between knot2kinky and the unsafe titanium? |
|
| |
|
Posts: 656
Location: Forest Lake, Mn. | Jeremy - 3/3/2017 11:09 PM
muddymusky - 3/3/2017 5:46 PM
jdsplasher - 3/3/2017 4:32 PM
American fishing wire...AFW...49 strand, coated.... I use the 40lb, 60lb, and the 90lb/ Uncoated, but Most leader material ties up just fine. JD
What knot do you use for this?
I'm a fly guy so I use the Ablright to attach the wire to the end of my fly line. May or may not mean anything to you and musky line. YMMV there..
For the knot to the bait try this guy, it's excellent and SIMPLE!!
It's called a Jig Loop. Tie an overhand knot about 3" from the end of the wire tippet BUT don't pull it totally shut. (Leave it "just loose enough" to insert the end of this wire back into. ) Now put the tag end into the hook eye.
Now push this tag end through that overhand knot...that you left loose "enough" but not too loose, right? Now, take and make a 1/2 hitch just behind that overhand knot and snug it up.
Make a second 1/2 hitch again behind this one but this time pull her tight with a pair of pliers!
Done! If it turned out right..and sometimes it doesn't, depending on how tight that overhand knot was...you'll end up with a neat little "jig loop" that your fly can swing freely on!!!
Is this the knot you're talking about?
https://www.youtube.com/watch?v=TXfPxtxKMbk
This looks a little better to me and is similar to the first video but includes wraps around the main line.
https://www.youtube.com/watch?v=1MGTgvAvm64 |
|
| |
|
Posts: 2269
Location: SE, WI. | Yes, very simple...^^^^^^^^^^^. ^^^^^^^^^^^ that's it! JD |
|
| |
|
Posts: 1144
Location: Minnesota. | If you can pick yer nose w/o pokin' yerself in the eye you can tie that knot!
I use two overhand knots, as mentioned previously. |
|
| |
|
Posts: 4343
Location: Smith Creek | Since the original post I have done really well with the knot 2 kinky, i use perfection loops. No bite offs or lost flies. |
|
| |
|
Posts: 656
Location: Forest Lake, Mn. | jdsplasher - 8/3/2017 7:09 AM
Yes, very simple...^^^^^^^^^^^. ^^^^^^^^^^^ that's it! JD
Quote Jeremy 8/3/2017 11:23 AM
"If you can pick yer nose w/o pokin' yerself in the eye you can tie that knot!"
Yes, it does look very simple.
I can pick me nose without pokin meself in da eye but walkin and chawin bubble gum I'ma still werking on.
I posted the video link for two reasons:
1. To make sure I had the correct knot as described in this thread
2. Sometimes it's easier to learn by watching rather than by reading.
Thanks for the information. I've been wanting to try tie able wire and wasn't sure about what knot to use. Now I know. Thanks |
|
| |
|
Posts: 770
| The bowline and jig loop are different knots... |
|
| |
|
Posts: 299
| I love "Rio's Powerflex Wire Bite" for fly fishing...so easy to tie and holds up well. The best loop knot I've found that we use for Tarpon, Muskie and other species is a "Steve Huff Double Figure 8." Best knot I've used and easy to tie. I think YouTube has a video on how to tie it. |
|
| |
|
Posts: 2269
Location: SE, WI. | Here you go Superman.... JD |
|
| |
|
| so easy to tie,i,ll try it for sure ty |
|
| |
