|
|
| I recently lost a tail on my Musky Buster Super AP lure and am not sure where to get a replacement tail for them. I am not sure if they sell replacements. Anyone have any info that could help me buy the right tails for this? Not sure if phantom tails are the same or not. Thanks for the help!! |
|
| |
|
Posts: 4
| Try using a mogambo tail . Shorten so the body matches the same diameter of the hole . I have tried gluing ,screwing and melting but I have found that drilling an hole and pegging the tail with a toothpick works pretty well |
|
| |
|
Posts: 43
| Had this happen to mine, but i did not loose the tail. what i did was run a small deck screw (or any outdoor/galvanized) in the center of the hole, then buzz off the head with a dremel. Then apply your glue and twist it back on. Has not come off since.
hope this helps.
Joe |
|
| |
|
Posts: 16
| I make my own large sized corkscrew keepers from piano wire. Attached to a screw eye and then thread your tail on. |
|
| |
