|
|
Posts: 770
| What are the biggest muskie baits made?
I know of the 2 pounders and mamoth curly sues but any others in this league?
How about biggest gliders, jerkbaits, and cranks? |
|
| |
|
Posts: 1100
| Biggest Glider i know of, is the 12" phantom, sure there are some bigger but, its a pretty god chunk of hard plastic to toss around.
|
|
| |
|
Posts: 735
Location: Apparently where the Muskie aren't | Regular production, I consider bulldawgs jerkbaits but as far as gliders I know smitty makes a 15 incher I think it might be 17. Biggest cranks probaly talonz deep threat (21" model). Suick has some large thrillers. 14 inch jakes. Legend plow is pretty big. Lip locks.
As for me, I'm working on my own special project hehehe. I'm thinking a cowdussa style lure but instead of a dussa I use a 2 pounder with double 20 blades in front of it. Now that sound big right there but I'm taking it a step further. I'm going to take this two pounder with double 20s and rig 5 of them up like a Alabama rig. Don't know what to call it so let me know if you come up with a good name. Now I just got to mount a small crane on my boat to cast and retrieve it lol. |
|
| |
|
Posts: 254
| You have the 16 inch line thru trout from savage gear that complements the 2lber and mammoth sue nicely when it comes to rubber.
For bucktails, try to contact muskie safari, they will make you a bucktail with size 20 blades.
For crankbaits, the 21 inch deep threat is the biggest i know off that is produced, although some custom 22-25 inch baits have been produced in the past.
For hard swimbaits, the japanese do produce a few custom big swimbaits in the 18-24 inch size range. |
|
| |
|
Posts: 4053
Location: Land of the Musky | Tackle Industries still makes 16" and 17" jointed Grunt lures. |
|
| |
|
Posts: 254
| For big paddle tail soft lures, boggs has a 15 incher, wolfcreek has a 14 incher and the giant mc rubber from swartzonker is also 14 inches |
|
| |
|
Posts: 859
Location: MN | The biggest production Jerkbait that you can buy with any regularity is the Musky Buster Intimidator its 14" inches long and Its 8 ounces. The Suick is 12 inches and 4 ounces weighted. I picked one up just this year. I noticed the tailfin has some thickness to it, really looking forward to trying it. |
|
| |
|
Location: Eastern Ontario | monsterlures - 4/19/2017 7:54 AM
You have the 16 inch line thru trout from savage gear that complements the 2lber and mammoth sue nicely when it comes to rubber .
If anything like the 12 inch be sure to up size the hooks and keep an eye on the wire leader. Some friends have lost the lures after not a lot of use. I would consider 150 lb flourocarbon or even hard mono leader material. To me the lure is more suited to trolling |
|
| |
|
Posts: 254
| horsehunter - 4/19/2017 12:33 PM
monsterlures - 4/19/2017 7:54 AM
You have the 16 inch line thru trout from savage gear that complements the 2lber and mammoth sue nicely when it comes to rubber .
If anything like the 12 inch be sure to up size the hooks and keep an eye on the wire leader. Some friends have lost the lures after not a lot of use. I would consider 150 lb flourocarbon or even hard mono leader material. To me the lure is more suited to trolling
Personaly, I directly replace the leader with a wire leader that I assemble myself, I have no faith in any factory made leader.
As for increasing the hook up rate, i intend to use the line thru modifier sold by savage gear to inprove the position of my hooks on this bait.
|
|
| |
|
Posts: 221
| 24 inch sucker on a quick strike |
|
| |
|
Posts: 745
| I have a 21 inch Custom X Crank.... |
|
| |
|
Posts: 254
| Mojo1269 - 4/19/2017 4:38 PM
I have a 21 inch Custom X Crank....
You got my attention, now how do I get one?
And how much did it cost? |
|
| |
|
Posts: 745
| When Chuck owned Custom X he would make a 21 incher as a special order bait. It was around $125 as I recall...It was a few years back... |
|
| |
|
Posts: 718
| Have you see our new bigger King Daddy Royal Orba? It's like casting a limb. R&H and MTO have them... |
|
| |
|
Posts: 293
Location: Sakatchewan,Canada | I have a 24" Ukko Wobbler that is about 26" with the lip. I caught a 38" 12lb 4oz pike on it...LOL!! |
|
| |
|
Posts: 293
Location: Sakatchewan,Canada | Bondy - 4/20/2017 8:16 AM
Have you see our new bigger King Daddy Royal Orba? It's like casting a limb. R&H and MTO have them...
Its big but not huge. A bit shorter and a bit lighter than a regular Pounder |
|
| |
|
Posts: 239
Location: Madison, WI | here's some of the biggest ones ive got http://imgur.com/a/7EIdL
Gonzonator by JL Lure is monster - 25 ounces or so
13 inch coercer by JL Lure
Jon Snow Crankbait
Mega Barfighter next to manta |
|
| |
