MuskieFIRST | Helix Gen 1 vs Gen 2 Transducer Question » Muskie Boats and Motors

Muskie Discussion Forums

You are logged in as a guest. ( logon | register )

Moderators: Slamr	View previous thread :: View next thread
Jump to page : 1 Now viewing page 1 [30 messages per page] Muskie Fishing -> Muskie Boats and Motors -> Helix Gen 1 vs Gen 2 Transducer Question

Message Subject: Helix Gen 1 vs Gen 2 Transducer Question

goose007us

Posted 3/11/2017 12:25 PM (#852967)
Subject: Helix Gen 1 vs Gen 2 Transducer Question

Posts: 267

Can the new Helix Gen 2 Mega units run the same transducers as the older Gen 1? (I ask b/c I am looking at potentialky purchasing a boat that had Gen 1 units on it but would like to upgrade to Gen 2 and Im wondering if I would have to switch out the Gen 1 transducers, too.) Thanks.

danlaboucane

Posted 3/11/2017 1:55 PM (#852973 - in reply to #852967)
Subject: RE: Helix Gen 1 vs Gen 2 Transducer Question

Posts: 483

i asked hummingbird the opposite of your question :can the gen 1 use the mega transducer ? and the answer was no there is something in the transducer and the unit that is different than gen 1 and you would be missing the mega imaging that the new G2 have .it looks very good from what i hear .

goose007us

Posted 3/13/2017 12:35 AM (#853142 - in reply to #852967)
Subject: Re: Helix Gen 1 vs Gen 2 Transducer Question

Posts: 267

Cool. Thank you.

Chemi

Posted 3/13/2017 7:24 AM (#853148 - in reply to #852967)
Subject: RE: Helix Gen 1 vs Gen 2 Transducer Question

I believe the answer to the question is in the middle: the old transducers will work as they used to with the older unit, but you won't get the Mega functionality when using it with a G2 Mega unit.

mtcook16

Posted 3/13/2017 9:41 AM (#853166 - in reply to #853148)
Subject: RE: Helix Gen 1 vs Gen 2 Transducer Question

Posts: 546

Location: MN

Chemi - 3/13/2017 7:24 AM

I believe the answer to the question is in the middle: the old transducers will work as they used to with the older unit, but you won't get the Mega functionality when using it with a G2 Mega unit.

This is correct. With an HDSI Transducer (standard with HELIX 10/12 Gen 1)you will not get MEGA SI or DI, but you will get 455kHz and 800 KHz. You would just select the "HD Side Imaging" transducer type from the "Sonar" menu when using on a G2N unit.

Since the units come with a transducer, it is worth installing the new MEGA transducer. If there is a high-speed transducer and Y-cable, the Y-cable will need to be swapped out for the new version that carries the MEGA imaging signals. http://www.humminbird.com/Products/MSIDB-Y/

Edited by mtcook16 3/13/2017 9:44 AM

Jump to page : 1
Now viewing page 1 [30 messages per page]

Search this forum
Printer friendly version
E-mail a link to this thread