MuskieFIRST | Trolling motors » Muskie Boats and Motors

Muskie Discussion Forums

You are logged in as a guest. ( logon | register )

Moderators: Slamr	View previous thread :: View next thread
Jump to page : 1 Now viewing page 1 [30 messages per page] Muskie Fishing -> Muskie Boats and Motors -> Trolling motors

Message Subject: Trolling motors

banditman

Posted 9/8/2016 12:43 PM (#829785)
Subject: Trolling motors

Posts: 167

Location: Tomahawk, WI

Im going to purchase a new trolling motor in the next few days. Im going with a Motorguide X5. Ive always used MGs and Ive never had an issue. Here is the question.
What size should I go with? Im already decided on a 24v motor but the X5 comes in 70# and 80# do I need to spend the extra money for 10# of thrust?
My boat is 17' long and it weighs 1700 with the motor.

Fishysam

Posted 9/8/2016 1:38 PM (#829794 - in reply to #829785)
Subject: Re: Trolling motors

Posts: 1209

Huh quite the stumper here, I guess if you have 8 gauge wire I'd get the 70# but if you have 6ga I'd go for the 80# I can't think of any other reason they sell them in that range... Or the 80# has a quality grade of "A++". Vs just a "B" grade I believe minnkota does stuff like that cause every terrova seems louder than an equal fortrex.

krisrishonda

Posted 9/8/2016 1:57 PM (#829798 - in reply to #829785)
Subject: Re: Trolling motors

Posts: 22

I think the 70 lb is only available in a 45" shaft. What size do you have now? Kris

169sportsman

Posted 9/8/2016 10:41 PM (#829860 - in reply to #829785)
Subject: Re: Trolling motors

Posts: 99

Buy once cry once.
I don't think you would ever regret having too much power. Not to mention batteries will last longer.

banditman

Posted 9/9/2016 8:47 AM (#829883 - in reply to #829785)
Subject: Re: Trolling motors

Posts: 167

Location: Tomahawk, WI

Going with the 80#

danlaboucane

Posted 9/9/2016 9:39 AM (#829898 - in reply to #829883)
Subject: Re: Trolling motors

Posts: 483

banditman - 9/9/2016 8:47 AM

Going with the 80#

well done !

bob1

Posted 9/9/2016 10:04 AM (#829903 - in reply to #829785)
Subject: Re: Trolling motors

Posts: 228

Smart move getting the larger motor!

Bob

pklingen

Posted 9/10/2016 3:27 PM (#830058 - in reply to #829785)
Subject: Re: Trolling motors

Posts: 866

Location: NE Ohio

a saying i choose to live by..............." you'll never know when you have too much, but you'll always know when you have too little! "

banditman

Posted 9/20/2016 7:19 AM (#830858 - in reply to #829785)
Subject: Re: Trolling motors

Posts: 167

Location: Tomahawk, WI

Ugh, 10 hours on the new motor and its in for a new control board already. Should be up and running by Thursday but its a real bummer when you pay that much money and it pukes right away.

mtcook16

Posted 9/20/2016 9:42 AM (#830871 - in reply to #829785)
Subject: Re: Trolling motors

Posts: 546

Location: MN

There is info out there on what has been going on with the X5 motors. I hope you are one of the lucky ones and that this is your last issue.

banditman

Posted 9/20/2016 11:42 AM (#830884 - in reply to #830871)
Subject: Re: Trolling motors

Posts: 167

Location: Tomahawk, WI

mtcook16 - 9/20/2016 9:42 AM

There is info out there on what has been going on with the X5 motors. I hope you are one of the lucky ones and that this is your last issue.

Really, where? I could onlyfind a couple threads on BBC and one on the texasfishing forum. Both were several months old with people that had some of the very first motors made. Nothing recent.

Jump to page : 1
Now viewing page 1 [30 messages per page]

Search this forum
Printer friendly version
E-mail a link to this thread