MuskieFIRST | TE line guide chatter fix? » Lures,Tackle, and Equipment

Muskie Discussion Forums

You are logged in as a guest. ( logon | register )

Moderators: Slamr	View previous thread :: View next thread
Jump to page : 1 Now viewing page 1 [30 messages per page] Muskie Fishing -> Lures,Tackle, and Equipment -> TE line guide chatter fix?

Message Subject: TE line guide chatter fix?

RBC

Posted 7/21/2016 10:27 AM (#824393)
Subject: TE line guide chatter fix?

Posts: 103

My 400 TE is making some noise when i cast and reel. I greased it and took off the cap on the bottom but didn't see an adjustment screw. Ideas? Thx

Propster

Posted 7/21/2016 10:40 AM (#824399 - in reply to #824393)
Subject: Re: TE line guide chatter fix?

Posts: 1901

Location: MN

There is no adjustment. When you take the line guide pawl cap off there should be a small washer in the bottom of the cap, or it maybe stuck to the backside of the pawl. The pawl is what's inside the line guide housing, and if it is worn down could cause you some minor noise but more importantly may start skipping a beat or getting stuck on one side of the worm shaft. First thing would be to replace the pawl, and make sure you have the washer in place.

Jump to page : 1
Now viewing page 1 [30 messages per page]

Search this forum
Printer friendly version
E-mail a link to this thread