|
|
Posts: 559
| can anyone give me specs on wheel bearings and seals for tuff trail 09 trailer with 1760 osprey on it |
|
| |
|
Posts: 559
|
09 tuff trail with 1760 on it specs on bearings and seals please
oops windsor got in the way
Edited by bobbie 6/30/2015 7:01 PM
|
|
| |
|
Posts: 32934
Location: Rhinelander, Wisconsin | Check for Trailmaster trailers specs. |
|
| |
|
Posts: 208
Location: Sun Prairie, WI | I just pull the hub apart and write down the numbers on the bearings, races, and seals then call my NAPA store |
|
| |
|
Posts: 16632
Location: The desert | May need D and tang washers. My napa store had a hell of a time finding them. |
|
| |
|
Posts: 2687
Location: Hayward, WI | Is there anything strange about the seals needed? I'm sure my bearings are likely fine, but I'd like to check and possibly repack before heading to Canada and want to make sure there are no strange surprises before I pull everything apart.
Tucker |
|
| |
|
Posts: 255
| Nothing special about them can get at local auto parts store or fleet farm look over the bearings closely for rust pits |
|
| |
|
Posts: 559
| nothing special, just didnt want to make 2 or 3 trips to parts store. the local boat shop knew what they were 1 1/16" & 1 3/8" 3700lb axle. the web site says 3500lb axle same bearings I guess |
|
| |
|
Posts: 255
| you are correct on the 3500 lb axle was just out in my shop to try and get you a napa part # but iam out of them |
|
| |
|
Posts: 255
| I found a box of dexter seals part # 010-019-00 auto store should be able to cross ref this number
hope that helps |
|
| |
|
Posts: 2687
Location: Hayward, WI | Thanks BLIZZAK, much appreciated. |
|
| |
