|
|
Posts: 60
| The new legend elites were suppose to be out mid month......any word on them? |
|
| |
|
Posts: 910
Location: South-Central VA | Rich Belanger told me June if I'm not mistaking...but I've been wrong before!
jeremy |
|
| |
|
Posts: 1000
| Cfollow - 4/22/2015 6:41 PM
Don't know that I am really in the market for a $500 rod but a June release is absurd. Most guys are going to have their set ups dialed in before the season starts.
I suspect two segments will buy this rod:
1. guides/pros - receive a discount and probably have early access
2. very price-insensitive crowd - will buy it whenever regardless
Personally I think this rod line serves two purposes:
1. offset some of the R&D costs. Technology will work its way into lower-tier rods over time
2. Flagship product that makes the price of other premium rods easier to stomach (LT series comes to mind.
Picked these up at NW expo and MN muskie expo. Incredible rods. I don't think the performance gain offsets the price, but it sure makes the LT series A LOT more palatable. Been thinking about a Big Nasty pretty seriously lately.... |
|
| |
|
Posts: 4053
Location: Land of the Musky | Cfollow - 4/22/2015 6:41 PM
Don't know that I am really in the market for a $500 rod but a June release is absurd. Most guys are going to have their set ups dialed in before the season starts.
I may be a few bucks off but the guide set alone MSRP is $130 on these rods. All of the top options are on this rod IMO... In short its like looking at a 2015 Corvette. You can get a nice off the lot Vette for $60k OR you can go for it and get the $120 Vette with every option on it  |
|
| |
|
Posts: 4343
Location: Smith Creek | Typically they release new models after ICAST in July, so a June release is better than the alternative.
I heard they'll start shipping next week, the 9 footers won't be till July. |
|
| |
|
Posts: 161
Location: New Jersey | I guess I would be part of segment 3? 
I have a rod coming directly from St. Croix and I was told late Spring. Not sure when exactly that means, but I'm stoked to try it. |
|
| |
|
Posts: 23
| Flambeauski - 4/23/2015 7:54 AM
Typically they release new models after ICAST in July, so a June release is better than the alternative.
I heard they'll start shipping next week, the 9 footers won't be till July.
So they are going to have 9' Elite's? They only had 4 models up to 8 1/2 at the show. Are they going to have a 9 footer comparable to the nasty? From what I saw at the show it didn't look like there was anything heavy enough to throw mag dawgs. |
|
| |
|
Posts: 910
Location: South-Central VA | From what I remember, they are only making 4 models with the 8'6" H being the largest. If they made a Big Dawg version I would be in heaven!
Jeremy |
|
| |
|
Posts: 161
Location: New Jersey | There's a 9 foot MH 3/4-3oz and a 9 foot Heavy 3-8oz for now. The newer Sling Blades are also going to 3-8 oz. instead of 2-6. |
|
| |
|
Posts: 246
Location: Grand Marais, MN | yes, looks like on rollie and hellens website there is two 9'ers listed for pre order. first i've heard of 9' since they didn't make it seem like it at the shows. |
|
| |
|
Posts: 4343
Location: Smith Creek | Feedback from the shows convinced them to do 9's. Wasn't in the initial plans so that's why they're so much later than the other 4 models. I hope the 90HF is like the Nasty, we'll just have to wait and see. |
|
| |
|
Posts: 23
| Flambeauski - 4/24/2015 8:20 AM
Feedback from the shows convinced them to do 9's. Wasn't in the initial plans so that's why they're so much later than the other 4 models. I hope the 90HF is like the Nasty, we'll just have to wait and see.
Right on! Does anyone know if they're all going to be split grip or are there going to be full cork rods as well? |
|
| |
|
Posts: 676
Location: Twin Cities, MN | All split to my memory as I chatted with the St Croix rep at the MN show and asked that question as I like a full grip for the most part.
Could be just me, but I thought my old diamondback still has the edge on nice light feel vs the new croix's also. |
|
| |
|
Posts: 32934
Location: Rhinelander, Wisconsin | It's just you. |
|
| |
|
Posts: 3
| I was told full cork for now by St Croix but I was surprised to hear that because all that I have scene in the shows are split grip. I am interested in finding out too. |
|
| |
|
Posts: 161
Location: New Jersey | As far as I know there are no full cork available right now. I think they're all split grip. |
|
| |
|
Posts: 7090
Location: Northwest Chicago Burbs | Pal - 4/25/2015 2:28 PM
All split to my memory as I chatted with the St Croix rep at the MN show and asked that question as I like a full grip for the most part.
Could be just me, but I thought my old diamondback still has the edge on nice light feel vs the new croix's also.
I have 2 old school DBs that were custom made. I had a chance to handle the new st. croixs. Though I havent had a chance to fish the St. Croix, I can tell you it's lighter than the old DBs. |
|
| |
|
Posts: 13688
Location: minocqua, wi. | ^same here ... have an old DB and it's awesome! ... stopped at the St. Croix shop and got to see a manufacturer's sample of the new rod and it's all of what it's being said to be. Really incredible what your brain is thinking when you grab it. it's a feather ... |
|
| |
|
Posts: 676
Location: Twin Cities, MN | Slamr - 4/27/2015 8:58 AM
I have 2 old school DBs that were custom made. I had a chance to handle the new st. croixs. Though I havent had a chance to fish the St. Croix, I can tell you it's lighter than the old DBs.
Slamr,
I also have an old school DB custom made by Thorne Bros many years ago.
The new St Croix just did not feel lighter to me when I stopped by their booth. My rod is 8 foot 4 inches and I was comparing to the 8 foot 6's for the most part. Next time around I will bring it along and compare to the 8 footers also. It could just be the split grip throwing me off.
Moving on. |
|
| |
|
Posts: 23
| catfishonthelake - 4/27/2015 7:54 AM
As far as I know there are no full cork available right now. I think they're all split grip.
That's too bad if that's true. I myself prefer the padding of the full cork on my ribs when ripping jerk baits etc. Does anyone know for sure? |
|
| |
|
Posts: 32934
Location: Rhinelander, Wisconsin | The new rods will begin shipping next week, if everything stays on track. Get your order in if you want one. |
|
| |
|
Posts: 1283
| They told me no full grip in the plans but 9ft rods are def coming a little later. |
|
| |
|
Posts: 246
Location: Grand Marais, MN | surprised they got a 9MH and not a 9XH coming out. I'd think there'd be more a market for an XH 9' model than a medium heavy |
|
| |
|
Posts: 23
| achotrod - 4/27/2015 4:45 PM
They told me no full grip in the plans but 9ft rods are def coming a little later.
Right on, good to know. I may have to pick one up despite the lack of a full cork grip. After holding one at the show it's hard not to wanna grab one. By far the lightest musky rod I've ever handled.
|
|
| |
|
Posts: 791
Location: WI | The sportsman in appleton wi has there first shipment in now. Sweet units |
|
| |
|
Posts: 496
| Got mine on order ! 8'6" |
|
| |
|
Posts: 663
| In stock now. 7'6" to 8'6" the nine footers later this summer. Here's the link for info http://www.muskyshop.com/modules/cart/products.php/nav_id/23/page/1... |
|
| |
|
Posts: 3
| Well when I came home I found a nice surprise. My new 8' 6" Legend Elite waiting for me. Blown away how light it is. Really excited to get out and use it. |
|
| |
