Muskie Discussion Forums

Forums | Calendars | Albums | Quotes | Language | Blogs Search | Statistics | User Listing
You are logged in as a guest. ( logon | register )
Moderators: Slamr

View previous thread :: View next thread
Jump to page : 1
Now viewing page 1 [30 messages per page]

Muskie Fishing -> Muskie Boats and Motors -> 1992 Johnson Trim/Tilt? Electronic?
 
Reply New post
Message Subject: 1992 Johnson Trim/Tilt? Electronic?
Fishboy19
Posted 6/11/2014 1:07 PM (#715084)
Subject: 1992 Johnson Trim/Tilt? Electronic?





Posts: 299


Hey guys, I have a hesitation when trimming the motor up and down from both the console throttle/switch and the switch on the side of the engine. It's intermittent, but sometimes it takes a couple flicks to get it to go up or down. Seems to make no difference which one I keep playing around with. Maybe a better response from the switch on the engine when it happens, but the switch on the throttle then works fine when driving. Eventually I've got it to work every time, but I'm probably starting to push my luck. I'm thinking the the switches may be fine Could this possible be the relay? It's all original and I've never had any previous issues with the entire hydraulic system. Any suggestions?

Thanks
Shep
Posted 6/11/2014 5:00 PM (#715115 - in reply to #715084)
Subject: RE: 1992 Johnson Trim/Tilt? Electronic?





Posts: 5874


Likely relays have aging contacts. Does it do it both ways? If not, swap them around, and see if the issue follows the swap.
Jump to page : 1
Now viewing page 1 [30 messages per page]
Reply New post
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete all cookies set by this site)