MuskieFIRST | Lexan Lip Suppliers » Basement Baits and Custom Lure Painting

Muskie Discussion Forums

You are logged in as a guest. ( logon | register )

Random quote: Hey...rub some of this crap on it.
- (Added by: KidDerringer)

Moderators: Slamr	View previous thread :: View next thread
Jump to page : 1 Now viewing page 1 [30 messages per page] More Muskie Fishing -> Basement Baits and Custom Lure Painting -> Lexan Lip Suppliers

Message Subject: Lexan Lip Suppliers

ShutUpNFish

Posted 4/17/2013 7:55 AM (#635318)
Subject: Lexan Lip Suppliers

Posts: 1202

Location: Money, PA

Would any of the bait makers here happen to have a reliable lip supplier they could recommend? My supplier may possibly be hangin' it up and I just want to be prepared just in case. I'm not talking Rollie & Helens or Lure Parts - retailers. I'm looking for someone to order direct from and in larger quantities.

I prefer router or water jet cut lexan over stamped out.

Thanks for ANY help in advance!

~Paul Fec

-You can PM info as well...

kyle smoker tackle

Posted 4/27/2013 10:02 PM (#637983 - in reply to #635318)
Subject: RE: Lexan Lip Suppliers

Anybody

Xtreme Muskie Lures

Posted 4/27/2013 10:32 PM (#637990 - in reply to #635318)
Subject: RE: Lexan Lip Suppliers

Posts: 107

Location: Ohio

Hi,
I have been using Metal Works Stamping in Wisconsin, but these are stamped. Dale is great to work with. I have recently just started cutting them out myself. I made a jig and I just use my router to cut them myself.

I am not sure of any other suppliers.

Thanks,

Muskyfreak44

Posted 4/28/2013 12:34 AM (#638003 - in reply to #637990)
Subject: RE: Lexan Lip Suppliers

Posts: 113

Can you show us a picture of the jig you made? What bit do you use? Thanks

ravenlures

Posted 4/28/2013 6:59 AM (#638012 - in reply to #635318)
Subject: RE: Lexan Lip Suppliers

Try "CB CUSTOM LIPS, LLC they just made up some samples for me and I am going to test out my lure in two weeks. They are great to work with.
[email protected]

Wayne

FUBAR

Posted 4/28/2013 12:40 PM (#638044 - in reply to #635318)
Subject: Re: Lexan Lip Suppliers

Posts: 216

Location: Middletown, Ohio

Here's the jig I made to cut out my lexan lips, I'm guessing it's just about like the one Greg made. I use a flush cutting bit with a bearing on the bottom to cut mine. You just cut a square/rectangle piece of lexan a little wider than the jig, slide it under the groove and lock it down with the locking arm and run the bearing on your router bit around the wood shape of your lip.
Here's some pics :

Mark

Edited by FUBAR 4/28/2013 12:42 PM

Zoom - | Zoom 100% | Zoom + | Expand / Contract | Open New window

Click to expand / contract the width of this image

(Lip jig 1.JPG)

Zoom - | Zoom 100% | Zoom + | Expand / Contract | Open New window

(Lip jig 2.JPG)

Attachments
----------------

Lip jig 1.JPG (53KB - 349 downloads)
Attachments

Lip jig 2.JPG (77KB - 278 downloads)

Pikopath

Posted 4/29/2013 2:34 AM (#638133 - in reply to #635318)
Subject: Re: Lexan Lip Suppliers

Posts: 501

Location: Norway

I like that one FUBAR! I use a similar technique for cutting blanks. Was watching how skateboards are made and grabbed the shaping idea from there.

ShutUpNFish

Posted 4/29/2013 7:14 AM (#638141 - in reply to #635318)
Subject: Re: Lexan Lip Suppliers

Posts: 1202

Location: Money, PA

This may be something I eventually have to get into...Hopefully not! But thanks for the tips Mark!

Tackle Industries

Posted 4/29/2013 12:13 PM (#638194 - in reply to #635318)
Subject: Re: Lexan Lip Suppliers

Posts: 4053

Location: Land of the Musky

Metal Works Stamping in Wisconsin

Also, http://www.mooreslures.com Dick has everything.

james

Edited by Tackle Industries 4/29/2013 12:14 PM

Gillripper

Posted 7/27/2013 12:22 PM (#653905 - in reply to #635318)
Subject: RE: Lexan Lip Suppliers

I tried to email CB custom and it seems as if its a bad address. Is he out of business? Or is there a phone # to reach him? Thanks

Jump to page : 1
Now viewing page 1 [30 messages per page]

Search this forum
Printer friendly version
E-mail a link to this thread