MuskieFIRST | keelguard question » Muskie Boats and Motors

Muskie Discussion Forums

You are logged in as a guest. ( logon | register )

Moderators: Slamr	View previous thread :: View next thread
Jump to page : 1 Now viewing page 1 [30 messages per page] Muskie Fishing -> Muskie Boats and Motors -> keelguard question

Message Subject: keelguard question

Graham S.

Posted 2/20/2013 5:24 PM (#619117)
Subject: keelguard question

Posts: 2

I have a 2009 X190 that I bought used last year and at the end of the season I noticed about a foot of the keelguard had peeled up and is loose, its about 3 foot behind the bow eye. I was wondering if it is worth trying to glue back on or should I replace it. I have been leaning towards replacing with a hambys heavy duty or similar. Also anyone know a hambys dealer they would recommend in northern IL or southern WI.

esoxfly

Posted 2/20/2013 5:47 PM (#619124 - in reply to #619117)
Subject: Re: keelguard question

Posts: 1663

Location: Kodiak, AK

3M 4200 will do you fine.

I'd say 5200, but if you ever wanted to remove it, you'd have to grind it off or remove gel coat.

Edited by esoxfly 2/20/2013 5:49 PM

jonnysled

Posted 2/20/2013 7:12 PM (#619152 - in reply to #619124)
Subject: Re: keelguard question

Posts: 13688

Location: minocqua, wi.

esoxfly - 2/20/2013 5:47 PM

3M 4200 will do you fine.

I'd say 5200, but if you ever wanted to remove it, you'd have to grind it off or remove gel coat.

yours was ground off twice before you probably had to do the same thing ... LOL. i wonder how much "extra" that boat has had spent on it over the years??

Jump to page : 1
Now viewing page 1 [30 messages per page]

Search this forum
Printer friendly version
E-mail a link to this thread