Muskie Discussion Forums

Forums | Calendars | Albums | Quotes | Language | Blogs Search | Statistics | User Listing
You are logged in as a guest. ( logon | register )
Moderators: Slamr

View previous thread :: View next thread
Jump to page : 1
Now viewing page 1 [30 messages per page]

Muskie Fishing -> Muskie Boats and Motors -> another Terrova issue!
 
Reply New post
Message Subject: another Terrova issue!
danmuskyman
Posted 7/1/2012 1:29 PM (#568545)
Subject: another Terrova issue!




Posts: 633


Location: Madison, WI
My 80lb Terrova is 2 weeks old and yesterday it stopped working. The green system ready light will not light up but the battery tester gauge works so that means i have power right? i would wiggle the marinco plug and sometimes it would light up but then nothing. i bought a new female plug and installed it and still nothing? i checked the male plug (also 2 weeks old) and the jumper is in tact and no black spots. None of my circuit breakers are tripped so what gives? Please help!!
horsehunter
Posted 7/1/2012 1:38 PM (#568547 - in reply to #568545)
Subject: Re: another Terrova issue!




Location: Eastern Ontario
two weeks old take it back
danmuskyman
Posted 7/1/2012 1:39 PM (#568548 - in reply to #568545)
Subject: Re: another Terrova issue!




Posts: 633


Location: Madison, WI
i ordered it online
horsehunter
Posted 7/1/2012 2:38 PM (#568554 - in reply to #568545)
Subject: Re: another Terrova issue!




Location: Eastern Ontario
somthing to be said for dealing with local retailer
Lone Stone
Posted 7/1/2012 2:39 PM (#568556 - in reply to #568545)
Subject: Re: another Terrova issue!




Posts: 477


Location: Iowa
Try connecting direct to the battery. You could still have a wire problem.
Ken
Posted 7/8/2012 10:08 PM (#569803 - in reply to #568545)
Subject: RE: another Terrova issue!


try wiggling the release
TJ DeVoe
Posted 7/8/2012 11:53 PM (#569815 - in reply to #569803)
Subject: Re: another Terrova issue!




Posts: 2323


Location: Stevens Point, WI
Make sure all screws in your marinco plug are tightened down, even the ones for the 12 volt slots. This sounds very typical of not having all the screws tight which woud not allow current to flow through the plug right. I've had this happen a few times and it was those screws.

Also, a Terrova will not run unless its in the down position. The motor has to be deployed. The tester will light up but the prop won't run when stowed FYI.

Edited by TJ DeVoe 7/8/2012 11:55 PM
Jump to page : 1
Now viewing page 1 [30 messages per page]
Reply New post
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete all cookies set by this site)