|
|
Posts: 540
Location: Leech Lake, Walker MN | Just installed new Terrova and at mid speed and higher
Feel a vibration in my Ranger and the head of the motor shakes also
Prop is tight does not seem out of round prop is Lined with the pin also
just wondering if this is normal Thanks
|
|
| |
|
Location: Eastern Ontario | I would try taking the prop off and turning it 180 degrees if that dosent help see if you can check it for balance maybe on a nail or one of the gizmos they sell for grinding lawnmower blades. |
|
| |
|
Posts: 540
Location: Leech Lake, Walker MN | Thanks I'll try that
|
|
| |
|
Posts: 13
Location: Madison WI | check to see if the pin is bent, also I would highly suspect the prop. |
|
| |
|
| you also want to make sure that the shaft is not hitting the rub rail ..when i mounted mine it was hitting the rail and vibrated like crazy |
|
| |
|
Posts: 1023
| I would bet the prop needs to be swapped - happened to me on a new unit. Swapped the prop and it was fine. Take the prop off and run the motor to see if the prop shaft is bent.
Landry |
|
| |
|
Posts: 540
Location: Leech Lake, Walker MN | Thank you guysthe prop swap might be the way Togo except I'm on an island in Canada and can't get to a shop . That's life on an island
|
|
| |
|
Posts: 5874
| Order one anyway, and then use this for a spare if that solves the problem. |
|
| |
