|
|
| Wondering what you guys think a 2007 Ranger 620 w/ 225 etec & t8 loaded with new electronics and 101 em up front with 900 hours is worth? Boat still has warranty on motors through 12/31/13. |
|
| |
|
| Well since its has a 07 hull on it, which is ranger worst hull. And having 900 hours on it, i would say about 28,000 to 29,000 somewhere in that ranger |
|
| |
|
| Why is 2007 the worst hull design? |
|
| |
|
| If you know anything about Rangers you would know that the 06 and 07 hulls were the worst. Thats why they only made them for two years. I have had a 02, 03 and 06 620, and the 06 was by far the worst for handling rough water. So I guess I know from experience |
|
| |
|
Posts: 1460
Location: Kronenwetter, WI | Generally things are worth what they sell for. I know that sounds obtuse, but I would do some searching around and see what others are listing/getting for them. |
|
| |
|
Posts: 32919
Location: Rhinelander, Wisconsin | Look it up. Nada Guide, Google it. |
|
| |
|
| Is the hull design the same for the 2006 620 and 621?
|
|
| |
|
| yes
|
|
| |
|
| Bill - 2/10/2012 7:20 AM
Is the hull design the same for the 2006 620 and 621?
No, they are not the same. Nor even close.
Biggest issue with the 620 is it would take water over the bow in 1 1/2 footers while not under power. Other than that, I thought the boat handled really nice. The faster you went, the better it rode. |
|
| |
|
| I'd steer clear of the 07 hulls. Period.
|
|
| |
|
| I have an 06' 620 and fish LSC religiously and have yet had a problem with this hull in some really rough water. Now, I've been in the 05' 620 hull and it does run a bit better in the rough stuff but not enough to make me go out and buy a newer Ranger hull. We've fished all over this massive system in some really rough conditions and I've always been impressed on well this hull handles. The newer hulls look better and cut through the waves with a much deeper keel but I feel the 06' and 07' hulls run just fine in big water. Down the road I'm sure I'll be looking into a newer 620 but for now I have absolutely zero complaints on well the 06' 620 handles LSC. |
|
| |
|
| i have an 01 620 great hull i think the new ones went back to that design now |
|
| |
|
Posts: 357
Location: Duluth, MN | I also have Zn 01 620 and it handles great. My buddy has an 03 and I they are very similar. |
|
| |
