MuskieFIRST | lowrance global map 3500c » Muskie Boats and Motors

Muskie Discussion Forums

You are logged in as a guest. ( logon | register )

Moderators: Slamr	View previous thread :: View next thread
Jump to page : 1 Now viewing page 1 [30 messages per page] Muskie Fishing -> Muskie Boats and Motors -> lowrance global map 3500c

Message Subject: lowrance global map 3500c

jjmuskie

Posted 1/31/2012 7:27 PM (#535934)
Subject: lowrance global map 3500c

Posts: 208

Location: Sun Prairie, WI

well it crapped out the other day (with a little help from me) The backlight has been periodically cycling though all the settings and would power on as soon as power was applied to the unit. So I took it apart and tried to figure out the problem. Now it doesn't work.

My question is will the puck (lgc-2000) work with other units? what about the power cord? Been looking at some used units that are the head only.

Looked at a global map 3300c and a lcw-37x, would my old powercord and gps puck work on these units.

Thanks, John

TJ DeVoe

Posted 1/31/2012 7:37 PM (#535939 - in reply to #535934)
Subject: Re: lowrance global map 3500c

Posts: 2323

Location: Stevens Point, WI

The power cord will work, the LGC-2000 will work but you will need an adapter cable. If I were you, I'd just find one with an LGC-3000, that will do you better anyhow.

Jump to page : 1
Now viewing page 1 [30 messages per page]

Search this forum
Printer friendly version
E-mail a link to this thread