MuskieFIRST | Refinishing/Saving a Weagle » Lures,Tackle, and Equipment

Muskie Discussion Forums

You are logged in as a guest. ( logon | register )

Moderators: Slamr	View previous thread :: View next thread
Jump to page : 1 Now viewing page 1 [30 messages per page] Muskie Fishing -> Lures,Tackle, and Equipment -> Refinishing/Saving a Weagle

Message Subject: Refinishing/Saving a Weagle

PredLuR

Posted 5/15/2009 7:22 AM (#378348)
Subject: Refinishing/Saving a Weagle

Posts: 291

Location: Madison, WI

Ive got a weagle that is starting to get long in the tooth after a long last seasons worth of use. The back bottom half of the lure is losing its top coat of clear and its quickly starting to work its way up and around the lure. Should I try to cut off the top coat and peel away anything that is undercut and try to re-coat with a epoxy on the areas that I cant save the original top coat?

I did T the hooks but the rash was too much, it did get thrown more than any lure in the boat and was responsible for a 48.5, 44.5, and 43.5 last year. Tasty little morsel's those weagles are.

lambeau

Posted 5/15/2009 8:09 AM (#378358 - in reply to #378348)
Subject: Re: Refinishing/Saving a Weagle

give Baldy a call, he'll take care of you.
http://www.muskiemojo.com/
E-mail: [email protected]
Phone: 763-443-7092

if you prefer to do it yourself, check out the Basement Baits forum for advice, lots and lots of expertise in there.
http://muskie.outdoorsfirst.com/board/forums/forum-view.asp?fid=25

Guest

Posted 5/15/2009 9:15 AM (#378368 - in reply to #378348)
Subject: RE: Refinishing/Saving a Weagle

Just keep using it, nothing bad will happen.

I wouldn't add anything to it.

The more water it soaks up, the better it will run!!! LEAVE IT ALONE

esoxaddict

Posted 5/15/2009 9:16 AM (#378371 - in reply to #378348)
Subject: Re: Refinishing/Saving a Weagle

Posts: 8781

Krylon

MuskieMike

Posted 5/15/2009 9:58 AM (#378387 - in reply to #378348)
Subject: RE: Refinishing/Saving a Weagle

Location: Des Moines IA

I had an old school weagle that I didn't want to retire, so my buddy Jeremy did a little rattlecan special on it. Real light coat of ETex over the top. They can be redone. Pic is terrible, but you get the basic idea.

Zoom - | Zoom 100% | Zoom + | Expand / Contract | Open New window

Click to expand / contract the width of this image

(weagle.jpg)

Attachments
----------------

weagle.jpg (75KB - 101 downloads)

Jump to page : 1
Now viewing page 1 [30 messages per page]

Search this forum
Printer friendly version
E-mail a link to this thread