MuskieFIRST | 2001 crestliner fishhawk trim and tilt guage » Muskie Boats and Motors

Muskie Discussion Forums

You are logged in as a guest. ( logon | register )

Moderators: Slamr	View previous thread :: View next thread
Jump to page : 1 Now viewing page 1 [30 messages per page] Muskie Fishing -> Muskie Boats and Motors -> 2001 crestliner fishhawk trim and tilt guage

Message Subject: 2001 crestliner fishhawk trim and tilt guage

bazil

Posted 7/20/2008 7:20 PM (#327377)
Subject: 2001 crestliner fishhawk trim and tilt guage

Posts: 24

Location: coon rapids mn

i had a leak of fluid on my power trim at the rods and i fixed the problem with new o rings but now my trim guage is out of position and reads poorly can anyone tell me how to adjust the needles on the guage ???

Shep

Posted 7/21/2008 8:14 AM (#327430 - in reply to #327377)
Subject: RE: 2001 crestliner fishhawk trim and tilt guage

Posts: 5874

The guage does not get adjusted. Which motor do you have? On Mercs, the sending unit can be adjusted. But not sure why that would be off.

bazil

Posted 7/21/2008 5:08 PM (#327524 - in reply to #327377)
Subject: RE: 2001 crestliner fishhawk trim and tilt guage

Posts: 24

Location: coon rapids mn

150 yamaha HPDI

Jump to page : 1
Now viewing page 1 [30 messages per page]

Search this forum
Printer friendly version
E-mail a link to this thread