Muskie Discussion Forums

Forums | Calendars | Albums | Quotes | Language | Blogs Search | Statistics | User Listing
You are logged in as a guest. ( logon | register )
Moderators: Slamr

View previous thread :: View next thread
Jump to page : 1
Now viewing page 1 [30 messages per page]

Muskie Fishing -> Lures,Tackle, and Equipment -> Testing Gps puck
 
Message Subject: Testing Gps puck
Joe Cal
Posted 6/6/2008 6:27 PM (#321408)
Subject: Testing Gps puck





Posts: 294


Location: Bloomer, Wi
Is there any way to test your gps puck to see if that may be bad. I am 99% certain that I have every thing hooked up correctly on my 520C lowrance but it still says "GPS module not responding. I have both the power and nmea wires going to my master power switch. But can you hook to two together then run it to a switch or do you have to run both of them seperatly to the switch.


If you have a good knowledge of lowrance you can just call me it would obviously be fast and easier. I really wanna get this thing working soon.
715 -828- 2357

Edited by Joe Cal 6/6/2008 6:41 PM
Joe Cal
Posted 6/8/2008 12:55 PM (#321547 - in reply to #321408)
Subject: Re: Testing Gps puck





Posts: 294


Location: Bloomer, Wi
Well I hooked my puck up to Curlytails unit and it said Gps Not Responding so it has to be that the Gps Puck itself is faulty and needs to be replaced.
muskie! nut
Posted 6/8/2008 1:03 PM (#321549 - in reply to #321408)
Subject: Re: Testing Gps puck





Posts: 2894


Location: Yahara River Chain
Try disconnecting the power wire and reconnect it. It seems that my buddy had this happen on Big V after never having any problems. He took the wires off the battery and reconected and the unit worked. It said the same thing your did.

Worth the time to try it.
Jump to page : 1
Now viewing page 1 [30 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete all cookies set by this site)