|
|
| I picked one of these up recently and i am having a little trouble working it. Do i use short taps or hard pulls? i get it to move good to one side then the next tap it runs straight then goes back to the same side. Any help is appreciated. Thanks |
|
| |
|
Posts: 723
| light downward taps with slack after each tap, they will tend to stay near the surface though, unless you work them at a painstakingly sloowwwww motion.
not one of my favorite glides. |
|
| |
|
Posts: 2691
Location: Pewaukee, Wisconsin | I had one that ran high and put a bigger hook on it. I work it just over the weeds and it gets the muskies going.
Just got a three pack that are weighted more. I will post when I get them wet. Working on Saturdays sucks..........I should be fishing. |
|
| |
|
Posts: 7
| Just wanted to respond to problems with the Slippery Slider. As Mike mentioned if you go with a bigger hook that might help. The Slippery Sliders are all manufactured the same, but being that it is a wood body the weight of the wood may vary. If there is any further concerns with the baits please feel free to email me at [email protected].
Thanks,
Doug Kloet - Owner
http://www.muskymagictackle.com |
|
| |
