Muskie Discussion Forums
| ||
Moderators: Slamr | View previous thread :: View next thread |
Jump to page : 1 Now viewing page 1 [30 messages per page] Muskie Fishing -> General Discussion -> musky tackle boxes |
Message Subject: musky tackle boxes | |||
spd132 |
| ||
does anyone know of a good cheap box to hold musky lures, or has anyone made their own. | |||
Pete Stoltman |
| ||
Posts: 663 | PVC tubes stacked in a milk crate works or the ultimate cheap tackle box is hanging them in a styrofoam cooler. In my opinion you spend a lot of dough to buy good baits and the purchase of at least one decent box is warranted. The Plano hanging box isn't too pricey. The model number is 7915 and retails most places at just under $50.00. | ||
muskyboy |
| ||
PVC tudes in a plastic bucket work the best, but I have to say I love my Lakewoods Monster Musky box! | |||
muskie! nut |
| ||
Posts: 2894 Location: Yahara River Chain | I made one from a milk crate using square vinyl down spout from Menard's. The reason you want to get it from Menard's it is thin walled and less weight when you put all the tubes in. One disadvantage is the baits get wet when it rains, but I never store then in it if they get wet. I also put a peg board floor in the bottom of the crate between the bottom and the tubes. I also leave a few short (put smaller baits there) so that you can use the handles. See pics. Attachments ---------------- cratea.JPG (58KB - 1483 downloads) crateb.JPG (59KB - 334 downloads) cratec.JPG (50KB - 296 downloads) | ||
Pete Stoltman |
| ||
Posts: 663 | Nice job and good idea on the short tubes near the handles! | ||
muskynightmare |
| ||
Posts: 2112 Location: The Sportsman, home, or out on the water | yes, and you can also cut notches for hooks. | ||
muskie! nut |
| ||
Posts: 2894 Location: Yahara River Chain | If you use a power saw to cut the downspout, put the blade in backwards so it doesn't chip out at the end of the cut and I might suggest that you use an unwanted one as well as the blade warms up, the plastic starts melting to the blade and it not real easy to get it off. | ||
Jump to page : 1 Now viewing page 1 [30 messages per page] |
Search this forum Printer friendly version E-mail a link to this thread |
Copyright © 2024 OutdoorsFIRST Media |