|
|
Posts: 665
Location: Moses Lake, WA | Another 12" lacquer and foil lure, two rattle chambers, basswood, aluminum lip. Made from 2x1x12" stock rather than my normal 3x1x12" patterns.
Attachments
----------------
 DSCN4440-1.jpg (134KB - 355 downloads)
DSCN4436-1.jpg (124KB - 334 downloads)
DSCN4435-1.jpg (118KB - 342 downloads)
DSCN4432-1.jpg (122KB - 357 downloads)
|
|
| |
|
Posts: 57
| Amazing work as always!! Do you use E- tex lite? |
|
| |
|
Posts: 665
Location: Moses Lake, WA | I've never used Etex Lite. I've probably used at least half a dozen different epoxies, right now I'm using Ultra Clear countertop epoxy. One of the things I do before mixing is to pour the A and B components (resin/hardener) into cups and heat them in the microwave (normally around 6-8 seconds) until any milkiness disappears. That's important to suppress microbubbles if you're using highly reflective siding. Heating the individual components also greatly reduces the viscosity, especially of the resin, and allows you to obtain a clear mixture prior to applying to the lure. |
|
| |
|
Posts: 256
Location: Valpo IN | sharp nice work |
|
| |
