MuskieFIRST | Lowrance and Hummingbird help! » Lures,Tackle, and Equipment

Muskie Discussion Forums

You are logged in as a guest. ( logon | register )

Moderators: Slamr	View previous thread :: View next thread
Jump to page : 1 Now viewing page 1 [30 messages per page] Muskie Fishing -> Lures,Tackle, and Equipment -> Lowrance and Hummingbird help!

Message Subject: Lowrance and Hummingbird help!

colinj8899

Posted 5/31/2019 6:29 AM (#940126)
Subject: Lowrance and Hummingbird help!

Posts: 164

I recently put a Helix 9 on my boat this winter. I moved my Lowrance from the drivers console to the bow and connected the Lowrance to the transducer on my minnkota bow mount trolling motor. I put the Helix at the drivers console and ran both these units to the same battery (this battery is only used for the graphs themselves and nothing else). My Lowrance I am not getting a top reading from 0 to 4 feet, its just a blank screen. My Helix I am not getting a top ready from about 0 to 3 feet. I have not had this problem in the past and was wondering if anyone could help with trouble shooting this. Not sure if its interference between the two graphs or what it could be. Thanks in advance for the help.

Fishysam

Posted 6/5/2019 8:29 AM (#940389 - in reply to #940126)
Subject: Re: Lowrance and Hummingbird help!

Posts: 1209

In settings make sure you change the sonar source to match the pucks being used, the us2 is a 83/200khz and your lowrance will have options of 50, 83, and 200.

Jump to page : 1
Now viewing page 1 [30 messages per page]

Search this forum
Printer friendly version
E-mail a link to this thread