|
|
Posts: 98
| when i reel forwards the handle can losely be almost backreeled half a cm anyone know what might be the problem
|
|
| |
|
Posts: 2687
Location: Hayward, WI | Does it seem like the handle nut is loose or the anti reverse is not working well? Does the spool turn backwards or just the handle? |
|
| |
|
Posts: 735
Location: Apparently where the Muskie aren't | Half a cm isn't very much. My NACL has a little play in it. But I don't have any other issues with the reel. Does everything else function ok? |
|
| |
|
Posts: 98
| the handle moves back slightly the spool does not. this only happens when the spool is under pressure |
|
| |
|
Posts: 815
Location: Waukee, IA | I had an NaCl do that. The stainless stud that holds the handle had reamed out the hole in the aluminum jigging handle and caused some play. It never hurt anything, but without knowing your exact situation it's tough to say if you're having the same problem |
|
| |
|
Posts: 983
| take good look at everything lot of times the locking Nut can be a hair off and cause lil play like your talking...have you changed handles recent or anything like that? |
|
| |
|
Posts: 98
| its also brand new out of the box and everything is intact it just slightly moves backwards when the spool its applied enough pressure to keep in place
|
|
| |
|
Posts: 1753
Location: Mt. Zion, IL | It is fine. Don't worry about it. |
|
| |
